Home › Code lookup › P0583
Powertrain code · Speed and idle control

P0583 Cruise Control Vacuum Control Circuit Low

How urgent? Book a check when convenient

What it means

The computer sees lower voltage than expected in the circuit that controls the cruise control vacuum solenoid, often from a wire shorted to ground. This part lets engine vacuum into the cruise servo on older vacuum-operated cruise systems.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the cruise control vacuum solenoid wiring and connector for damage or corrosion
  2. Check related fuses and relays
  3. Test the cruise control vacuum solenoid with a meter or scan tool and compare with spec

Signs you may notice

  • Cruise control not working
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonControl wire shorted to ground
  • CommonFaulty cruise control vacuum solenoid
  • PossibleCorroded connector
  • PossibleComputer driver circuit fault (rare)

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new cruise control vacuum solenoid if it tests bad.

Common questions

What does P0583 mean?

The computer sees lower voltage than expected in the circuit that controls the cruise control vacuum solenoid, often from a wire shorted to ground. This part lets engine vacuum into the cruise servo on older vacuum-operated cruise systems.

Can I drive with code P0583?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0583?

Common possibilities to test include: control wire shorted to ground; faulty cruise control vacuum solenoid; corroded connector; computer driver circuit fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.