P0588 Cruise Control Vent Control Circuit High
What it means
The computer sees higher voltage than expected in the circuit that controls the cruise control vent solenoid, often from a wire shorted to power or a failed part. This part releases vacuum from the cruise servo so cruise lets go of the throttle.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the cruise control vent solenoid wiring and connector for damage or corrosion
- Check related fuses and relays
- Test the cruise control vent solenoid with a meter or scan tool and compare with spec
Signs you may notice
- Cruise control not working or slow to release
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonControl wire shorted to power
- CommonFaulty or shorted cruise control vent solenoid
- PossibleCorroded connector
- PossibleComputer driver circuit fault (rare)
Typical repair once the cause is confirmed
Usually a wiring or connector repair, or a new cruise control vent solenoid if it tests bad.
Common questions
What does P0588 mean?
The computer sees higher voltage than expected in the circuit that controls the cruise control vent solenoid, often from a wire shorted to power or a failed part. This part releases vacuum from the cruise servo so cruise lets go of the throttle.
Can I drive with code P0588?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0588?
Common possibilities to test include: control wire shorted to power; faulty or shorted cruise control vent solenoid; corroded connector; computer driver circuit fault (rare). A shop should confirm the cause before replacing parts.