Home › Code lookup › P0594
Powertrain code · Speed and idle control

P0594 Cruise Control Servo Control Circuit/Open

How urgent? Book a check when convenient

What it means

The computer found a problem, such as a broken connection, in the circuit it uses to control the cruise control servo. This part moves the throttle to hold your set speed.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the cruise control servo wiring and connector for damage or corrosion
  2. Check related fuses and relays
  3. Test the cruise control servo with a meter or scan tool and compare with spec

Signs you may notice

  • Cruise control not working
  • Check engine light on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty cruise control servo
  • CommonBroken wire or loose or corroded connector
  • PossibleBlown fuse or failed relay
  • PossibleComputer driver circuit fault (rare)

Typical repair once the cause is confirmed

Usually a wiring or connector repair, or a new cruise control servo if it tests bad.

Common questions

What does P0594 mean?

The computer found a problem, such as a broken connection, in the circuit it uses to control the cruise control servo. This part moves the throttle to hold your set speed.

Can I drive with code P0594?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0594?

Common possibilities to test include: faulty cruise control servo; broken wire or loose or corroded connector; blown fuse or failed relay; computer driver circuit fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.