U0073 Control Module Communication Bus "A" Off
What it means
A control module shut itself off the network because of too many communication errors.
Can I keep driving?
Use care. With the module network down, warning lights, gauges, brake assist or the transmission may act up, and the car may not restart. If it stalls, steering or brakes feel different, or many warnings appear, have it towed. Otherwise go straight to a shop soon.
What to test before replacing parts
Check battery voltage, network fuses and grounds, measure network wiring resistance, and isolate modules one by one to find a short before replacing any module.
- Test the battery and charging voltage
- Check network resistance at the diagnostic port (about 60 ohms on most high speed CAN networks)
- Unplug modules one at a time to find one shorting the network
- Inspect wiring in areas that see water, heat or movement
Signs you may notice
- Several warning lights on at once
- Some gauges or features may stop working
- Car may not start in some cases
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonNetwork wiring short or open
- CommonA failing module flooding the network
- CommonLow battery voltage
- PossibleModule that set the code is failing
Typical repair once the cause is confirmed
Find and repair the damaged network wire or connector, or replace the module that is shorting the network.
Common questions
What does U0073 mean?
A control module shut itself off the network because of too many communication errors.
Can I drive with code U0073?
Use care. With the module network down, warning lights, gauges, brake assist or the transmission may act up, and the car may not restart. If it stalls, steering or brakes feel different, or many warnings appear, have it towed. Otherwise go straight to a shop soon.
What causes U0073?
Common possibilities to test include: network wiring short or open; a failing module flooding the network; low battery voltage; module that set the code is failing. A shop should confirm the cause before replacing parts.