U0330 Software Incompatibility With Tire Pressure Monitor Module
What it means
The software in the tire pressure monitor module does not match what the other modules expect. This usually happens after a module was replaced, swapped from another vehicle or updated.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Ask whether any module was recently replaced or reprogrammed
- Check the module part number and software level against the maker data
- Keep a battery maintainer connected during any reprogramming
Signs you may notice
- Tire pressure light on or flashing
- Tire pressures may not display
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonModule replaced with a used or wrong part number
- CommonModule not programmed, or programmed with the wrong software
- PossibleSoftware update interrupted, for example by low battery voltage
- PossibleOther modules need updating to match
Typical repair once the cause is confirmed
Program the module with the correct software using dealer-level tools.
Common questions
What does U0330 mean?
The software in the tire pressure monitor module does not match what the other modules expect. This usually happens after a module was replaced, swapped from another vehicle or updated.
Can I drive with code U0330?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0330?
Common possibilities to test include: module replaced with a used or wrong part number; module not programmed, or programmed with the wrong software; software update interrupted, for example by low battery voltage; other modules need updating to match. A shop should confirm the cause before replacing parts.