Your 1997 Acura CLproblems, repair costs and recalls
What we've documented about the 1997 Acura CL: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1997 Acura CL
7 documented issues apply to 1997, most serious first.
Automatic transmission shifting problems and failure
- What you'll notice
- Harsh or delayed shifts, slipping, flaring revs between gears, or the car not moving in drive.
- Why it happens
- Automatic transmission complaints are among the most common for the first-generation CL, with some owners needing more than one transmission.
- What to do
- Check the fluid level and condition. If it slips or won't engage, stop driving hard and have the transmission diagnosed before more damage is done.
Older driver airbag inflator can rupture (recall)
- What you'll notice
- No warning signs. You may have received a recall letter.
- Why it happens
- Driver airbag inflators used in 1996-2001 Honda and Acura models can absorb moisture over time, which can make them rupture or underinflate in a crash.
- What to do
- Look up your VIN and have the dealer inspect and replace the inflator for free.
Free at the dealer under the recall. Ask the dealer to check your VIN for open recalls.
Engine stalls from worn ignition switch (recall)
- What you'll notice
- The engine shuts off without warning while driving, or the car won't start; jiggling the key may bring power back.
- Why it happens
- Electrical contacts inside the ignition switch wear out and lose connection.
- What to do
- Check your VIN for an open recall and have the free ignition switch replacement done. If it stalls, steer to safety; steering and brakes get heavier with the engine off.
Free at the dealer under the recall. Ask the dealer to check your VIN for open recalls.
Front lower ball joints wear out (recall)
- What you'll notice
- Clunking from the front over bumps, loose steering, or uneven tire wear. In the worst case the joint separates and the front wheel collapses.
- Why it happens
- The front lower ball joints on these cars could wear out early.
- What to do
- Check your VIN for this recall, and have the ball joints inspected if you hear clunks. Do not drive a car with a loose ball joint.
Free if the recall was never done. If it was, worn joints later are a normal repair.
Starter fails to crank the engine
- What you'll notice
- A click or nothing at all when you turn the key, even though the lights work.
- Why it happens
- Starter and ignition parts are a common complaint on these cars. Corroded battery terminals can cause the same symptom.
- What to do
- Clean and tighten the battery terminals first. If it still won't crank, have the starter and ignition switch tested.
Driver power window stops working
- What you'll notice
- The driver window won't go up or down, or moves slowly.
- Why it happens
- The power window motor fails, sometimes more than once.
- What to do
- Have the motor and switch tested. Replacing the motor (and regulator if worn) fixes it.
Speedometer reads slower than actual speed
- What you'll notice
- The speedometer shows a lower speed than you are really going.
- Why it happens
- Owners report the speedometer reading slow; a failing speed sensor or gauge is the usual cause.
- What to do
- Check your speed with a phone GPS app and have the speed sensor and gauge tested. Wrong readings can lead to tickets.
Repair prices for your 1997 Acura CL
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace automatic transmission with used or remanufactured unit
- Replace driver power window motor
- Replace vehicle speed sensor
- Replace starter
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Inspect and replace driver airbag inflatorNo charge if your vehicle is included
- Replace ignition switchNo charge if your vehicle is included
- Replace front lower ball jointsNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…