Chrysler 300problems, repair costs and recalls
Problems reported across 2005–2023. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
12 documented issues across all years, most serious first.
HEMI lifter tick and camshaft wear
- What you'll notice
- A ticking or metallic chirp that stays or grows louder once warm, sometimes with misfires and a check engine light.
- Why it happens
- The needle bearings in a roller lifter can seize, so the lifter grinds against the camshaft and flattens the lobe. Metal from the damage spreads through the oil.
- What to do
- Have it diagnosed promptly and limit driving until you know the cause. Caught early, the fix is lifters and camshaft; ignored, it can ruin the engine.
Left cylinder head valve seat wear (3.6L)
- What you'll notice
- Check engine light with a misfire, most often on cylinder 2, plus rough running, a ticking noise, and lost power.
- Why it happens
- Valve seats and guides in the left cylinder head on early engines could overheat and wear, so the cylinder lost compression. Chrysler revised the head and extended warranty coverage on it.
- What to do
- Have the misfire checked with a compression or leak-down test. Ask a dealer whether the extended coverage still applies to your car.
Alternator can fail suddenly (recall)
- What you'll notice
- The battery light comes on, lights dim, steering can get heavy, and the engine may stall and not restart.
- Why it happens
- The alternator could fail internally without warning. On cars with electro-hydraulic power steering, losing charging power can also cut steering assist. Chrysler recalled these cars more than once.
- What to do
- Check your VIN for open recalls. If the battery light comes on, get off the road safely and have the charging system checked before driving further.
Loose front driveshaft bolts on AWD (recall)
- What you'll notice
- Clunking or vibration from the front of the car. If the shaft comes loose, the car can lose drive or roll while in Park unless the parking brake is set.
- Why it happens
- Bolts holding the front driveshaft on some all-wheel-drive cars could work loose. Chrysler recalled affected cars.
- What to do
- Check your VIN for the recall. Use the parking brake when parked and have any new clunk checked before driving further.
Cruise control may not turn off (recall)
- What you'll notice
- Cruise control stays on and the car keeps accelerating or holding speed after you try to cancel it.
- Why it happens
- An electrical short while cruise control is active could stop the system from switching off. Chrysler recalled millions of vehicles, including these, for a software update.
- What to do
- Check your VIN for the recall. If it ever happens, brake firmly and shift to Neutral to stop the car.
Side curtain air bag inflators can rupture (recall)
- What you'll notice
- There may be no warning before a crash. An air bag warning light is not a reliable sign.
- Why it happens
- A manufacturing defect could make the side curtain air bag inflators break apart when they go off and throw metal pieces toward the people inside. Chrysler recalled affected cars.
- What to do
- Check your VIN for the recall and get the repair done as soon as parts are available.
Oil sludge and internal coolant leak can ruin the engine (2.7L)
- What you'll notice
- Oil pressure light, ticking or knocking, running hot, milky or thick oil, and in bad cases sudden engine seizure.
- Why it happens
- The 2.7L V6 runs hot and is prone to sludge, linked to its crankcase ventilation and small oil capacity. Its water pump is driven by the timing chain inside the engine, so when its gasket fails coolant leaks into the oil. Owners and class-action suits reported complete engine failures.
- What to do
- Change oil on time with the correct oil. If the oil light comes on, you hear knocking, or the oil looks milky, stop driving and have the engine checked right away.
Car can roll away if not fully in Park (shifter recall)
- What you'll notice
- The electronic gear selector springs back to center, so it is easy to think the car is in Park when it is still in gear. The car can move after the driver gets out.
- Why it happens
- Cars with the eight-speed automatic and electronic shifter did not warn the driver well enough when the door opened with the car out of Park. Chrysler recalled them for a software update to reduce the risk of rollaway.
- What to do
- Check your VIN for recall 16V-240 (Chrysler S27). Until it is done, always confirm P on the dash and set the parking brake before getting out.
Oil filter housing leak (3.6L)
- What you'll notice
- Oil or coolant pooling on top of the engine or dripping at the back, a burning smell, or oil or coolant loss between changes.
- Why it happens
- The oil filter and cooler housing is plastic and sits in the valley under the intake. Heat cycling can warp or crack it, and its seals harden and leak.
- What to do
- Have the leak source confirmed and the housing or seals replaced. Keep an eye on oil and coolant levels until it is fixed.
Rocker arm tick (3.6L)
- What you'll notice
- A ticking from the top of the engine, sometimes with a misfire code and check engine light.
- Why it happens
- The rocker arms that ride on the camshaft can wear or fail. Chrysler released a revised part, but newer engines still have the problem.
- What to do
- Have the noise and any misfire diagnosed. Repairs mean replacing the rocker arms and sometimes the lifters or camshaft.
Worn front tension struts, ball joints and tie rods
- What you'll notice
- Clunking or banging over bumps, shaking over expansion joints, pulling to one side, alignment that will not stay set, and uneven tire wear.
- Why it happens
- The front suspension wears its tension strut (compression arm) bushings and ball joints early, and owners also report tie rod ends and struts needing replacement.
- What to do
- Have the front suspension inspected and the worn parts replaced, then get an alignment. Replace a loose ball joint or tension strut promptly because it affects steering control.
Broken exhaust manifold bolts (HEMI)
- What you'll notice
- A ticking sound, loudest on a cold start, that may fade as the engine warms up. You may smell exhaust under the hood or in the cabin.
- Why it happens
- Repeated heating and cooling makes the manifold flex until the bolts, usually at the rear of the head, snap. Exhaust then leaks past the gasket. It is often mistaken for lifter tick.
- What to do
- Have the manifold bolts inspected. Get the leak fixed soon if you smell exhaust inside the car.
Repair prices for your Chrysler 300
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Extract broken manifold bolts, replace bolts and gasket
- Replace camshaft and lifters (5.7L HEMI)
- Replace left cylinder head (3.6L Pentastar)
- Replace alternator
- Replace oil filter housing and oil cooler gaskets
- Replace rocker arms and lash adjusters, both banks
- Inspect and replace front driveshaft bolts
- Powertrain control software update
- Replace both side curtain airbags
- Replace engine with a used or remanufactured 2.7L
- Replace front tension struts and align
- Software update adding automatic Park feature
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.