Your 2013 Chrysler 300problems, repair costs and recalls
What we've documented about the 2013 Chrysler 300: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2013 Chrysler 300
7 documented issues apply to 2013, most serious first.
HEMI lifter tick and camshaft wear
- What you'll notice
- A ticking or metallic chirp that stays or grows louder once warm, sometimes with misfires and a check engine light.
- Why it happens
- The needle bearings in a roller lifter can seize, so the lifter grinds against the camshaft and flattens the lobe. Metal from the damage spreads through the oil.
- What to do
- Have it diagnosed promptly and limit driving until you know the cause. Caught early, the fix is lifters and camshaft; ignored, it can ruin the engine.
Left cylinder head valve seat wear (3.6L)
- What you'll notice
- Check engine light with a misfire, most often on cylinder 2, plus rough running, a ticking noise, and lost power.
- Why it happens
- Valve seats and guides in the left cylinder head on early engines could overheat and wear, so the cylinder lost compression. Chrysler revised the head and extended warranty coverage on it.
- What to do
- Have the misfire checked with a compression or leak-down test. Ask a dealer whether the extended coverage still applies to your car.
Alternator can fail suddenly (recall)
- What you'll notice
- The battery light comes on, lights dim, steering can get heavy, and the engine may stall and not restart.
- Why it happens
- The alternator could fail internally without warning. On cars with electro-hydraulic power steering, losing charging power can also cut steering assist. Chrysler recalled these cars more than once.
- What to do
- Check your VIN for open recalls. If the battery light comes on, get off the road safely and have the charging system checked before driving further.
Car can roll away if not fully in Park (shifter recall)
- What you'll notice
- The electronic gear selector springs back to center, so it is easy to think the car is in Park when it is still in gear. The car can move after the driver gets out.
- Why it happens
- Cars with the eight-speed automatic and electronic shifter did not warn the driver well enough when the door opened with the car out of Park. Chrysler recalled them for a software update to reduce the risk of rollaway.
- What to do
- Check your VIN for recall 16V-240 (Chrysler S27). Until it is done, always confirm P on the dash and set the parking brake before getting out.
Oil filter housing leak (3.6L)
- What you'll notice
- Oil or coolant pooling on top of the engine or dripping at the back, a burning smell, or oil or coolant loss between changes.
- Why it happens
- The oil filter and cooler housing is plastic and sits in the valley under the intake. Heat cycling can warp or crack it, and its seals harden and leak.
- What to do
- Have the leak source confirmed and the housing or seals replaced. Keep an eye on oil and coolant levels until it is fixed.
Rocker arm tick (3.6L)
- What you'll notice
- A ticking from the top of the engine, sometimes with a misfire code and check engine light.
- Why it happens
- The rocker arms that ride on the camshaft can wear or fail. Chrysler released a revised part, but newer engines still have the problem.
- What to do
- Have the noise and any misfire diagnosed. Repairs mean replacing the rocker arms and sometimes the lifters or camshaft.
Broken exhaust manifold bolts (HEMI)
- What you'll notice
- A ticking sound, loudest on a cold start, that may fade as the engine warms up. You may smell exhaust under the hood or in the cabin.
- Why it happens
- Repeated heating and cooling makes the manifold flex until the bolts, usually at the rear of the head, snap. Exhaust then leaks past the gasket. It is often mistaken for lifter tick.
- What to do
- Have the manifold bolts inspected. Get the leak fixed soon if you smell exhaust inside the car.
Repair prices for your 2013 Chrysler 300
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Extract broken manifold bolts, replace bolts and gasket
- Replace camshaft and lifters (5.7L HEMI)
- Replace left cylinder head (3.6L Pentastar)
- Replace alternator
- Replace oil filter housing and oil cooler gaskets
- Replace rocker arms and lash adjusters, both banks
- Software update adding automatic Park feature
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…