Your 2017 Chrysler Pacificaproblems, repair costs and recalls
What we've documented about the 2017 Chrysler Pacifica: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2017 Chrysler Pacifica
13 documented issues apply to 2017, most serious first.
Harsh shifting, jerking or slipping from the 9-speed automatic
- What you'll notice
- Hard bangs or jerks when shifting at low speed, slipping with the engine revving before a gear catches, clunks into reverse or drive, or a Service Transmission message.
- Why it happens
- The nine-speed automatic used with the gas engine is known for rough shift quality. Many cases are improved with software updates and a shift relearn; some vans need a valve body or a new transmission. Most reports involve 2017-2018 vans.
- What to do
- Ask the dealer to check for transmission software updates and do an adaptive relearn first. If it slips or flashes Service Transmission, have it checked right away, ideally while still under warranty.
Hybrid battery can catch fire while parked (recall)
- What you'll notice
- Usually no warning. Some vans show a hybrid system warning before an event.
- Why it happens
- The high-voltage battery in some 2017-2018 Pacifica Hybrids can short internally and start a fire even when the van is off and not charging.
- What to do
- Check your VIN for recall 22V077 (replaced by 24V538). Until it is fixed, follow Chrysler's advice: don't charge it and park outside, away from buildings.
Done free by a Chrysler dealer under recall 24V-538.
Hybrid inverter can fail and stop the van (recall)
- What you'll notice
- Sudden loss of drive power with a hybrid system warning; the van coasts and won't move under its own power.
- Why it happens
- Diodes inside the power inverter module can be damaged by a voltage spike and shut down the drive system.
- What to do
- Check the VIN for recall 17V371 and have the free repair done.
Done free by a Chrysler dealer under recall 17V-371.
Gas engine may not restart properly after electric driving (recall)
- What you'll notice
- Loss of power when the engine should start, a check engine light, or a hot smell from the exhaust.
- Why it happens
- After running on battery power, the gas engine may not restart correctly. Unburned fuel can then reach the catalytic converter and overheat it, with a small fire risk.
- What to do
- Check the VIN for recall 18V740 and have the software updated for free.
Done free by a Chrysler dealer under recall 18V-740.
12-volt battery isolator post can overheat (recall)
- What you'll notice
- A burning plastic smell near the driver seat area, electrical warnings, or no-start.
- Why it happens
- On plug-in hybrids the 12-volt isolator post under the driver area can develop high resistance and overheat, which can start a fire.
- What to do
- Check the VIN for recall 20V334 and have the free fix done.
Done free by a Chrysler dealer under recall 20V-334.
Transmission wiring connector can shut off the engine (hybrid recall)
- What you'll notice
- The engine shuts off unexpectedly and the van may lose drive power, often with warning lights.
- Why it happens
- A wiring connector inside the hybrid transmission can short circuit and shut the engine down.
- What to do
- Check the VIN for recall 23V010 and have the dealer repair it for free.
Done free by a Chrysler dealer under recall 23V-010.
Engine software can lose crank sensor timing and stall (recall)
- What you'll notice
- The engine stalls while driving and may restart.
- Why it happens
- The engine control software can lose sync with the crankshaft position sensor signal on the 3.6L gas engine, which shuts the engine off.
- What to do
- Check the VIN for recall 18V049. The software update is free.
Done free by a Chrysler dealer under recall 18V-049.
Engine computer power chip can fail and stall the van (recall)
- What you'll notice
- Sudden stall while driving or a no-start, sometimes with several warning lights.
- Why it happens
- A voltage regulator chip in the powertrain control module can fail, shutting the engine off or preventing it from starting.
- What to do
- Check the VIN for recall 18V524 and have the free repair done.
Done free by a Chrysler dealer under recall 18V-524.
Loose battery ground can cut power steering and stall the engine (recall)
- What you'll notice
- Steering suddenly feels very heavy, the engine stalls at a stop, or the stop/start system acts up.
- Why it happens
- On gas vans with engine stop/start, the battery ground connection can loosen, causing intermittent loss of power steering assist or a stall.
- What to do
- Check the VIN for recall 19V348. The dealer fixes the ground for free.
Done free by a Chrysler dealer under recall 19V-348.
Cruise control may not turn off (recall)
- What you'll notice
- Cruise control stays on and holds or increases speed even after you press the brake or switch it off.
- Why it happens
- A short circuit in the wiring can keep cruise control from canceling.
- What to do
- If it happens, shift to neutral and brake firmly. Check the VIN for recall 18V332; the software update is free.
Done free by a Chrysler dealer under recall 18V-332.
Oil filter housing and oil cooler leak
- What you'll notice
- Oil spots under the van, burning oil smell, oil or coolant seeping at the top back of the engine valley, or coolant loss.
- Why it happens
- The Pentastar V6 uses a plastic oil filter housing with a built-in oil cooler. It can crack or its gaskets can leak oil and sometimes coolant.
- What to do
- Have the leak traced before it soaks the belts and starter. The housing is replaced as a unit, often with an updated part.
Ticking engine from worn rocker arms
- What you'll notice
- A ticking or tapping from the top of the engine, sometimes with a misfire or check engine light.
- Why it happens
- Rocker arm roller bearings on the Pentastar V6 can wear and seize, which also wears the camshaft lobe if left alone.
- What to do
- Have a shop listen to it and check for misfire codes. Fixing worn rockers early avoids a costly camshaft replacement.
Service Hybrid System warning or no-start (hybrid)
- What you'll notice
- A Service Hybrid System or Service Electric Vehicle System message, the van refusing to go into Ready mode, or loss of electric-only driving.
- Why it happens
- Faults in the plug-in hybrid system, from the 12-volt battery and isolator post to the high-voltage battery and power electronics, trigger this warning. Several recalls cover parts of this system.
- What to do
- Check for open recalls first. Hybrid parts carry a longer federal emissions warranty, so have a Chrysler dealer diagnose it before paying for repairs.
Repair prices for your 2017 Chrysler Pacifica
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Software update and relearn; replace valve body or transmission if needed
- Replace oil filter housing and oil cooler assembly
- Replace rocker arms and lash adjusters, both banks
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Hybrid battery inspection, software and battery repair (free recall repair)No charge if your vehicle is included
- Update or replace power inverter module (free recall repair)No charge if your vehicle is included
- Update hybrid control software (free recall repair)No charge if your vehicle is included
- Repair 12-volt isolator post (free recall repair)No charge if your vehicle is included
- Repair hybrid transmission wiring connector (free recall repair)No charge if your vehicle is included
- Update engine control software (free recall repair)No charge if your vehicle is included
- Replace powertrain control module (free recall repair)No charge if your vehicle is included
- Repair battery ground connection (free recall repair)No charge if your vehicle is included
- Update engine computer software (free recall repair)No charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…