Your 2000 Ford Contourproblems, repair costs and recalls
What we've documented about the 2000 Ford Contour: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2000 Ford Contour
11 documented issues apply to 2000, most serious first.
Automatic transmission slipping or failing
- What you'll notice
- The car slips out of gear, loses gears, shifts late or harshly, or will not move forward. Many failures happen around 100,000-140,000 miles.
- Why it happens
- The CD4E automatic in the Contour has a known weakness, often starting with the front pump. Ford also issued bulletins for no forward drive and no overdrive on this transmission.
- What to do
- Check the fluid level and smell. If it slips or will not move, stop driving it hard and get a transmission diagnosis. On a car this age a used or rebuilt transmission is usually the most sensible fix.
Water pump failure and overheating
- What you'll notice
- Coolant leaking from the front of the engine, the temperature gauge climbing, steam, or the engine overheating. Some owners replaced the pump several times.
- Why it happens
- The water pump on these cars used a plastic impeller that can crack or break apart, and pump bearings and housings also failed. Ford sent owner notices about water pump bearing and housing failures.
- What to do
- Stop driving as soon as the gauge climbs, since overheating can ruin the head gasket. When replacing the pump, ask for one with a metal impeller.
Stalls or dies while driving from fuel pump failure
- What you'll notice
- The engine loses power and dies while driving, may restart after sitting, or cranks but will not start.
- Why it happens
- Owners most often trace this to a failing fuel pump or no power reaching the pump. A tripped or faulty fuel shutoff (inertia) switch can do the same thing.
- What to do
- If it dies, get safely off the road. Have a shop check fuel pressure and whether the pump is getting power before replacing parts.
Rear brakes can lock up from a corroded valve (recall)
- What you'll notice
- The rear wheels lock or skid during hard braking, especially on cars driven on salted roads.
- Why it happens
- On cars without ABS, the rear brake pressure-reducing valves could corrode from road salt and stop working, letting the rear brakes lock. Ford recalled 1996-1998 cars and later added 1999-2000 cars.
- What to do
- Check your VIN for the recall and make sure the improved valves were installed.
Recalls this old may no longer be done by dealers; ask with your VIN.
Seat belt buckle may not latch securely (recall)
- What you'll notice
- A seat belt that does not stay latched or releases under force.
- Why it happens
- Some seat belt buckle bases on 2000 Contours were not heat treated correctly and could be weak. Ford recalled these cars to replace the buckles.
- What to do
- Test that each belt latches firmly. Check your VIN for the recall.
Recalls this old may no longer be done by dealers; ask with your VIN.
Check engine light from clogged EGR passages
- What you'll notice
- The check engine light comes on with an EGR flow code, and the engine may ping or knock under load.
- Why it happens
- Carbon can plug the exhaust gas recirculation (EGR) passages so not enough exhaust flows back into the engine. Ford issued a bulletin for EGR flow codes on these cars.
- What to do
- Have the codes read. Cleaning the EGR passages and checking the EGR valve and sensor usually fixes it.
Lean codes from vacuum leaks (V6)
- What you'll notice
- The check engine light comes on with codes P0171 and P0174, and the idle may be rough.
- Why it happens
- Cracked vacuum hoses or leaking intake gaskets let in extra air, making the engine run lean. Ford issued a bulletin for these codes from vacuum leaks.
- What to do
- Have a shop do a smoke test to find the leak. It is usually a cheap hose or gasket.
Rough idle and stalling at idle
- What you'll notice
- The engine idles rough or unevenly, stalls when coming to a stop, or makes a hooting noise from the idle air valve when slowing down.
- Why it happens
- Dirty or failing idle air control valves and vacuum leaks are common causes. Ford issued bulletins for rough idle, stalling and noise from the idle air bypass valve.
- What to do
- Have the idle air control valve cleaned or replaced and check for vacuum leaks.
Heater core leak
- What you'll notice
- A sweet coolant smell inside, foggy windows, a wet passenger floor, or coolant slowly disappearing.
- Why it happens
- Ford issued a bulletin for heater core leaks on these cars. The heater core is behind the dashboard.
- What to do
- Check the coolant level and look for wet carpet. Replacing the core is a big job because much of the dash comes out.
Steering wheel shakes when braking
- What you'll notice
- The steering wheel or car vibrates when you brake, especially from highway speed.
- Why it happens
- Ford issued bulletins about brake vibration on these cars, usually from uneven front rotors and pad material.
- What to do
- Have the front rotors and pads inspected. New or resurfaced rotors and pads usually fix it.
Front wheel bearing noise
- What you'll notice
- A humming or growling noise that grows with speed and may change when turning.
- Why it happens
- Ford issued a bulletin for front wheel bearing noise on these cars.
- What to do
- Have the wheel bearings checked. A badly worn bearing can affect steering and braking.
Repair prices for your 2000 Ford Contour
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace automatic transmission with used or rebuilt unit
- Replace water pump and refill coolant
- Replace fuel pump assembly
- Clean EGR passages; replace EGR valve or sensor if needed
- Smoke test and replace vacuum hose or intake gasket
- Clean or replace idle air control valve
- Replace heater core
- Replace front brake pads and rotors
- Replace front wheel bearing
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free recall repair at a Ford dealerNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…