Your 1996 Ford E-Seriesproblems, repair costs and recalls
What we've documented about the 1996 Ford E-Series: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1996 Ford E-Series
4 documented issues apply to 1996, most serious first.
Cruise control switch can overheat and catch fire (recall)
- What you'll notice
- Usually no warning. In rare cases there is smoke or a burning smell from the engine compartment, even with the van parked and off.
- Why it happens
- A cruise control deactivation switch on the brake master cylinder can leak brake fluid internally, overheat and start an underhood fire. Ford recalled many trucks, vans and motorhome chassis to add a fused harness.
- What to do
- Check your VIN for the cruise control switch recall and have the fused harness installed. Park outside until it is done.
Front end rattles and loose steering
- What you'll notice
- Rattling or clunking from the front over bumps, play in the steering wheel, wandering on the highway, or uneven front tire wear.
- Why it happens
- These are heavy vans and chassis, and front suspension and steering parts such as ball joints, tie rod ends and bushings wear under the weight. RepairPal lists front-end rattling and play in the front wheels among common E-350 complaints.
- What to do
- Have the front end inspected and aligned. Worn steering parts get worse quickly on a heavy vehicle and can affect control.
Misfires from injector wiring or driver module (7.3L diesel)
- What you'll notice
- Misfiring, rough running, lost power or stalling, often blamed on bad injectors at first.
- Why it happens
- Connectors on the wiring harness under the valve covers fail, and the injector driver module in the fender area can be damaged by moisture.
- What to do
- Have injector circuit codes read and the harness and module connectors checked before replacing injectors.
Coolant contamination from injector sleeves or oil cooler (7.3L diesel)
- What you'll notice
- Coolant loss, bubbles in the coolant, fuel smell in the coolant, or oil and coolant mixing.
- Why it happens
- On high-mileage engines the injector sleeves can crack and let fuel into the coolant, and aged oil cooler seals can leak.
- What to do
- Have the coolant tested for fuel or oil. Catching it early prevents bigger engine damage.
Repair prices for your 1996 Ford E-Series
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace worn ball joints or tie rod ends, then align
- Replace under-valve-cover injector harness
- Reseal oil cooler or replace injector sleeves
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Install fused wiring harness for cruise control switchNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…