Ford Explorerproblems, repair costs and recalls
Problems reported across 1996–2027. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
49 documented issues across all years, most serious first.
Cruise control deactivation switch can overheat and catch fire (recalls 09V-399, 07V-336, 06V-286)
- What you'll notice
- Smoke or a burning smell from under the hood near the brake master cylinder, sometimes with the vehicle parked and off.
- Why it happens
- The switch that turns off cruise control when you brake can leak brake fluid internally and overheat, which can start an engine-compartment fire.
- What to do
- Check the VIN for these recalls. If the switch has not been replaced or disconnected, have it done before parking the vehicle in or near a building.
Running board courtesy light wiring can overheat (recall 03V-094)
- What you'll notice
- A hot-plastic or burning smell near the running boards, or courtesy lights that flicker or stop working.
- Why it happens
- The wiring for the lights under the running boards can overheat, creating a fire risk.
- What to do
- Check the VIN for this recall and have it inspected if you smell burning.
Steering gear mounting bolts may break (recall 07V-181)
- What you'll notice
- A clunk from the front end when turning or a steering feel that changes suddenly.
- Why it happens
- Steering gear mounting bolts may have been overtightened at the factory and can fracture.
- What to do
- Check the VIN for this recall and have it done before regular driving.
Transmission cooler line bolt can loosen (recall 07V-453)
- What you'll notice
- Transmission fluid dripping near the front of the transmission or a burning smell.
- Why it happens
- A bolt holding a transmission cooler line may loosen, letting fluid leak onto hot exhaust parts, which can start a fire.
- What to do
- Check the VIN for this recall. Stop and shut the engine off if you see smoke or smell burning fluid.
Front seat recliner may not hold (recall 10V-161)
- What you'll notice
- A front seat back that feels loose or does not stay locked in position.
- Why it happens
- Teeth in the manual seat recliner were made out of specification, so the seat back may not hold in a crash.
- What to do
- Check the VIN for this recall and get it repaired promptly.
Sudden loss of power steering assist (recall 14V-286)
- What you'll notice
- Steering suddenly becomes very heavy, mainly at low speed, with a power steering warning on the dash.
- Why it happens
- An intermittent connection in the electric power steering gear can cut the motor position signal, and the system shuts off assist.
- What to do
- Check the VIN for this recall. The steering still works but takes much more effort, so drive carefully to a dealer for the update or rack replacement.
Front door may unlatch in a side crash (recall 15V-171)
- What you'll notice
- Usually no warning sign.
- Why it happens
- A spring in the interior door handle can come out of place, so the door may unlatch in a side impact.
- What to do
- Check the VIN for this recall and get it fixed promptly.
Exhaust smell inside the cabin (NHTSA EA17-002, Ford program 17N03)
- What you'll notice
- An exhaust or rotten-egg smell in the cabin, mostly when accelerating hard with the A/C on recirculate, sometimes with headaches or nausea. The smell is often strongest at the rear.
- Why it happens
- Exhaust can be drawn into the cabin through gaps in the rear body. NHTSA investigated, and Ford offered a free service that seals the rear of the body and recalibrates the climate control.
- What to do
- Ask a Ford dealer to confirm the 17N03 service was done. If you smell exhaust or feel dizzy or sick, open the windows, stop driving and have it inspected before using the vehicle again.
Internal water pump leaks coolant into the oil
- What you'll notice
- Coolant level keeps dropping with no puddle under the vehicle, milky or tan sludge on the oil cap or dipstick, a sweet smell near the engine, overheating or rough running.
- Why it happens
- The water pump sits inside the engine and is driven by the timing chain. When its seal fails, coolant can leak straight into the engine oil and ruin the bearings.
- What to do
- If coolant is disappearing, stop driving and have the oil checked for coolant right away. Caught early, the pump can be replaced before the engine is damaged.
Rear toe link can fracture (recalls 19V-435, 26V-101)
- What you'll notice
- Clunking from the rear over bumps, uneven rear tire wear, a rear wheel that looks out of line, or vague, wandering handling.
- Why it happens
- The rear suspension toe links can crack and break, which sharply reduces steering control. In salt-belt states the attached ball joints can also corrode and seize, and further recalls covered toe links that were badly welded or previously repaired.
- What to do
- Check the VIN for 19V-435, 26V-101 and the related toe link recalls. If you hear a new rear clunk or the vehicle wanders, stop driving and have it towed.
Fuel delivery module can crack and leak (recalls 13V-227, 15V-812)
- What you'll notice
- A raw fuel smell, especially near the rear seat or after filling up, or fuel dripping under the vehicle.
- Why it happens
- The fuel pump module on top of the tank can crack and leak fuel, creating a fire risk.
- What to do
- Stop driving if you smell fuel and check the VIN for these recalls.
Parking brake may not fully apply (recall 15V-464)
- What you'll notice
- The vehicle creeps or rolls even with the parking brake set.
- Why it happens
- The parking brake may not fully engage, so a parked vehicle could roll away.
- What to do
- Check the VIN for this recall. Always make sure the shifter is fully in Park and park on level ground until it is repaired.
Engine block heater can leak coolant and short (recalls 25V-685, 26V-012)
- What you'll notice
- Coolant leaking near the block heater, a low coolant level, or a tripped outlet when the heater cord is plugged in.
- Why it happens
- The engine block heater can leak coolant into its electrical connection and short out.
- What to do
- Check the VIN for these recalls. Do not plug in the block heater until the repair is done.
Turbo oil supply tube may leak (recall 16V-925)
- What you'll notice
- Oil on the engine, a burning oil smell or smoke from under the hood.
- Why it happens
- Turbocharger oil supply tubes may have been brazed incorrectly and can leak oil onto hot parts.
- What to do
- Check the VIN for this recall. Pull over and shut off the engine if you see smoke.
Fuel pressure sensor may leak (recall 18V-807)
- What you'll notice
- A fuel smell from the engine bay.
- Why it happens
- An assembly error can let fuel leak at the fuel pressure sensor, creating a fire risk.
- What to do
- Stop driving if you smell fuel and check the VIN for this recall.
Seat recliner may not lock (recall 19V-633)
- What you'll notice
- A seat back that does not lock firmly or moves unexpectedly.
- Why it happens
- A part in the seat recliner may be missing, so the seat back may not hold in a crash.
- What to do
- Check the VIN for this recall and get it fixed promptly.
Rear driveshaft may fracture (recall 20V-693)
- What you'll notice
- Vibration or clunking from under the vehicle, then loss of drive or the vehicle rolling in Park.
- Why it happens
- A driveshaft on some all-wheel-drive models may fracture.
- What to do
- Check the VIN for this recall and use the parking brake until it is fixed.
Rear lower control arm bolts may break (recall 21V-154)
- What you'll notice
- Clunking from the rear suspension, a change in alignment or pulling to one side.
- Why it happens
- Some rear lower control arm bolts were not heat-treated and can break, affecting handling.
- What to do
- Check the VIN for this recall and have it repaired before regular driving.
Park pawl may engage while moving (recall 26V-402)
- What you'll notice
- A sudden jolt or loss of drive while driving.
- Why it happens
- The transmission park mechanism may engage while the vehicle is moving.
- What to do
- Check the VIN for this recall and get the repair right away.
Rear axle bolt can break (recalls 22V-255, 23V-199, 23V-675)
- What you'll notice
- A loud clunk or heavy vibration from the rear when accelerating, sudden loss of drive, or the vehicle rolling while in Park.
- Why it happens
- A rear axle mounting bolt can fracture, letting the axle housing shift and the driveshaft or axle shafts disconnect. The main fix is software that sets the parking brake each time you shift to Park, and Ford extended coverage on the bolt for some vehicles.
- What to do
- Use the parking brake every time you park, check the VIN for all of these recalls, and stop driving if a new rear clunk appears.
Engine computer reset can cut power (recall 23V-069)
- What you'll notice
- A sudden loss of drive power while driving, sometimes with warning messages.
- Why it happens
- The powertrain control module can reset while driving on vehicles with the 2.3L and ten-speed automatic.
- What to do
- Check the VIN for this recall and get the software update. Pull over safely if power cuts out.
Windshield wiper motor can fail (recall 26V-117)
- What you'll notice
- Wipers that stop working, often in rain or snow.
- Why it happens
- The front wiper motor may fail.
- What to do
- Check the VIN for this recall and get the repair before driving in bad weather.
Second-row seat belt anchor bolts (recalls 25V-093, 26V-159)
- What you'll notice
- Usually no warning; a seat belt anchor may feel loose.
- Why it happens
- Second-row seat belt anchor or buckle bolts may not be installed or tightened correctly, so the belt may not hold in a crash.
- What to do
- Check the VIN for these recalls and get them done promptly.
Intake valve can break (recall 24V-635)
- What you'll notice
- A rough-running engine, misfire light, knocking, or sudden loss of power.
- Why it happens
- Intake valves on some turbocharged V6 engines may fracture and damage the engine.
- What to do
- Check the VIN for this recall. Stop driving and have it towed if the engine suddenly runs rough or knocks.
Low-pressure fuel pump can fail (recall 25V-455)
- What you'll notice
- Stalling, hesitation or a no-start.
- Why it happens
- The in-tank fuel pump may fail and stop fuel delivery.
- What to do
- Check the VIN for this recall. Have it towed if it stalls and will not restart.
Fuel line or filler tube may come loose (recalls 22V-685, 22V-088)
- What you'll notice
- A raw fuel smell or fuel dripping under the vehicle.
- Why it happens
- A loose fuel line on the 2.3L or a filler tube that can detach may leak fuel, creating a fire risk.
- What to do
- Stop driving if you smell fuel and check the VIN for these recalls.
Loose transmission bolt may stop Park from engaging (recall 23V-070)
- What you'll notice
- The vehicle may roll after being shifted into Park.
- Why it happens
- A transmission bolt may be loose, which can keep the park gear from engaging.
- What to do
- Always set the parking brake and check the VIN for this recall.
Turbo oil supply line may leak (recall 23V-597)
- What you'll notice
- Oil on the engine or a burning oil smell or smoke from under the hood.
- Why it happens
- The oil supply line to the turbocharger may leak oil onto hot parts.
- What to do
- Check the VIN for this recall. Pull over and shut off the engine if you see smoke.
Transmission valve body machining error (recall 25V-164)
- What you'll notice
- Unusual shifting or drive problems.
- Why it happens
- A transmission valve body may have been machined incorrectly at the factory.
- What to do
- Check the VIN for this recall and have it repaired soon.
Powertrain computer reset while driving (recalls 26V-371, 25V-239)
- What you'll notice
- A sudden loss of drive power while driving.
- Why it happens
- The powertrain control module can reset while the vehicle is moving.
- What to do
- Check the VIN for these recalls and get the software update. Pull over safely if power cuts out.
Trailer hitch bolts may be loose (recall 25V-687)
- What you'll notice
- Clunking from the hitch area when towing.
- Why it happens
- Bolts holding the trailer hitch may not be tightened correctly, so the hitch could come loose under load.
- What to do
- Do not tow until the VIN has been checked for this recall and the hitch is inspected.
Front brake caliper and chassis bolts (recalls 25V-371, 25V-316, 25V-020)
- What you'll notice
- Clunks or rattles from the front, a pull while braking, or vibration.
- Why it happens
- Front brake caliper bolts, a front subframe bolt or transmission crossmember bolts may not be tightened properly.
- What to do
- Check the VIN for these recalls and have the work done before driving much.
Engine failure from bearing or connecting rod defects (recalls 25V-344, 26V-343)
- What you'll notice
- Knocking from the engine, low oil pressure warning, or sudden loss of power.
- Why it happens
- Some engines were built with defective connecting rods or bearings that can fail.
- What to do
- Check the VIN for these recalls. Stop driving at once if you hear knocking or see an oil pressure warning.
Driver seat may recline on its own (recall 26V-470)
- What you'll notice
- The driver seat back moves rearward unexpectedly.
- Why it happens
- A fault in the driver seat recliner can let the seat back recline without the driver using the control.
- What to do
- Check the VIN for this recall and get it fixed before regular driving.
Automatic slipping or missing gears (TSB 02-13-8)
- What you'll notice
- Slipping, a missing second or third gear, delayed shifts and a check-engine light with gear-ratio codes.
- Why it happens
- Low internal line pressure in the automatic transmission can keep clutches and bands from holding. Ford issued a service bulletin covering these years.
- What to do
- Have the transmission diagnosed and ask the shop about TSB 02-13-8. Catching it early may avoid a full rebuild.
Timing chain rattle from worn guides and tensioners
- What you'll notice
- A rattle or chatter from the engine for a few seconds at start-up, later turning into a constant rattle, often with a check-engine light for cam timing or a rough idle.
- Why it happens
- The single-overhead-cam 4.0L uses three timing chains with plastic guides and tensioners. The guides wear and break, letting the chains slap, and the rear chain sits at the back of the engine where repairs take a lot of labor.
- What to do
- Have a rattle diagnosed soon. If a guide breaks, the chain can jump timing and damage the engine, so repair it before it gets worse.
Transmission fluid leak at the cooler line fitting (TSB 01-10-2)
- What you'll notice
- Red fluid drips near the transmission or radiator lines and a low transmission fluid level.
- Why it happens
- On some early-build trucks the cooler line connection at the transmission case can leak. Ford issued a service bulletin for it.
- What to do
- Check the fluid level and have the fitting repaired soon. Running the transmission low on fluid can damage it.
Liftgate glass hinges and panel crack (recall 04S20)
- What you'll notice
- Cracks in the liftgate panel below the rear window, broken glass hinges, the rear glass shattering when opened or closed, or water getting in.
- Why it happens
- The liftgate glass hinges and the panel around them can crack from stress. Ford recalled the hinge and ball stud bracket, but complaints continued after the repair.
- What to do
- Check the VIN for recall 04S20. Avoid opening the rear glass if the hinges are cracked and have the liftgate inspected.
5R55W/5R55S five-speed slipping, no third gear or harsh reverse
- What you'll notice
- Engine flare on the 2-3 shift, slipping, no third gear, delayed or harsh reverse, or the transmission failing outright.
- Why it happens
- These five-speed automatics are known for worn servo bores, broken intermediate bands and valve body leaks. Transmission failure is the most reported problem for this generation.
- What to do
- Have shifting problems checked early by a shop that knows this transmission and ask about Ford TSBs 03-25-4 and 05-21-8. Some fixes cost far less than a rebuild if caught early.
Harsh or lunging shifts (TSB 07-6-3)
- What you'll notice
- Hard jolts when shifting, the vehicle lunging forward, and transmission trouble codes.
- Why it happens
- Harsh shifting is the top owner complaint for 2006. Ford issued a bulletin for valve body contamination in the six-speed automatic used with the V8.
- What to do
- Have the transmission scanned and ask about TSB 07-6-3. Have harsh engagements checked before they wear the transmission further.
"Shift to Park" message and dead battery (TSBs 15-0047, 17-2219)
- What you'll notice
- A "Shift to Park" message even when in Park, the vehicle will not fully shut off, and the battery runs down overnight.
- Why it happens
- The switch that tells the vehicle the shifter is in Park can fail or misread, so the vehicle thinks it is still in gear.
- What to do
- Ask a dealer about TSBs 15-0047 and 17-2219. Have it fixed soon to avoid repeated dead batteries.
AWD transfer unit (PTU) leaks and overheats (TSB 18-2255)
- What you'll notice
- A burning-oil smell, light smoke from the passenger side, dark fluid dripping near the right front of the transmission, grinding or clunking, or an AWD warning.
- Why it happens
- The power transfer unit that sends power to the rear wheels sits right next to the exhaust. Its gear oil cooks and breaks down, seals leak, and the unit can wear out. Ford issued a bulletin for an intermediate shaft seal leak on 2.3L models.
- What to do
- Have any burning smell or leak near the right front checked soon. Changing the PTU fluid and fixing leaks early can prevent a failed unit.
A-pillar trim can come loose (recall 24V-031)
- What you'll notice
- Rattling or a loose trim panel along the windshield pillar inside the cabin.
- Why it happens
- The clips holding the A-pillar trim may not engage, so the trim can detach, including when the curtain airbag deploys.
- What to do
- Check the VIN for this recall and have the clips replaced.
Roof rail covers can loosen and fly off (recalls 21V-316, 26V-448)
- What you'll notice
- Wind noise or rattling from the roof rails, or a cover that lifts at highway speed.
- Why it happens
- Retention pins holding the roof rail covers can loosen, so a cover may detach while driving and become a road hazard.
- What to do
- Check the VIN for these recalls and have the covers secured.
Rearview or 360-degree camera image fails (several recalls)
- What you'll notice
- A blank, frozen, flipped or blue backup camera image.
- Why it happens
- Loose connections, wiring errors and software faults have led to many camera recalls on this generation.
- What to do
- Check the VIN for camera recalls such as 23V-342, 25V-442, 26V-123 and 24V-801. Back up using mirrors with extra care until fixed.
Adaptive headlights may turn the wrong way (recall 26V-121)
- What you'll notice
- Headlights swing away from the direction of a curve.
- Why it happens
- A software fault can turn the adaptive headlights the wrong way in curves.
- What to do
- Check the VIN for this recall and get the update.
Shifter stuck in Park (TSB 06-25-10)
- What you'll notice
- The shift lever will not move out of Park, so the manual release has to be used.
- Why it happens
- Ford issued a service bulletin for shifters that stick in Park on these years.
- What to do
- Use the manual shift-lock release if needed and ask a dealer about TSB 06-25-10.
Sluggish take-off and harsh bump at low speed (TSB 11-12-10)
- What you'll notice
- A slow start from a stop, then a harsh bump or slip, mostly after a rolling stop.
- Why it happens
- The six-speed automatic shift calibration can cause poor low-speed engagement. Ford released a bulletin with a fix.
- What to do
- Ask a Ford dealer about TSB 11-12-10 and a software update.
Long cranking and harsh cold downshifts (TSB 13-5-31)
- What you'll notice
- The engine cranks longer than normal before starting, and downshifts feel harsh or late when cold.
- Why it happens
- Ford issued a bulletin for these symptoms on the turbocharged 3.5L.
- What to do
- Ask a Ford dealer about TSB 13-5-31.
Repair prices for your Ford Explorer
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Rebuild automatic transmission
- Disconnect or replace switch and add fused jumper harness
- Replace timing chains, guides and tensioners
- Repair running board light wiring and add protection
- Replace transmission cooler line fitting and top off fluid
- Replace liftgate glass hinges
- Rebuild 5R55 transmission
- Reprogram powertrain computer per Ford bulletin
- Replace shift interlock solenoid or shifter part
- Replace steering gear mounting bolts
- Tighten or replace cooler line bolt and refill fluid
- Replace front seat recliner mechanism
- Replace electric power steering gear
- Replace front door latch
- Repair shifter park-detect switch or install shifter repair kit
- Reseal rear body seams and update climate control settings
- Replace internal water pump, flush oil and coolant
- Replace PTU seals, vent and fluid
- Replace both rear toe links and align
- Reattach A-pillar trim with new clips
- Replace fuel delivery module
- Adjust or replace parking brake cable
- Reattach roof rail covers with new clips or adhesive
- Replace engine block heater
- Replace turbo oil supply tube
- Replace fuel rail pressure sensor
- Replace seat recliner mechanism
- Replace rear driveshaft
- Replace rear lower control arm bolts
- Update control module software
- Replace rear axle mounting bolt
- Replace front wiper motor
- Replace rear camera
- Tighten or replace seat belt anchor bolts
- Replace engine long block
- Replace fuel pump module
- Reconnect fuel line or secure filler tube
- Replace park pawl abutment bolt in transmission
- Replace turbo oil supply line
- Replace transmission valve body
- Tighten or replace trailer hitch bolts
- Replace front caliper and chassis bolts
- Replace engine
- Replace driver seat recliner mechanism
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.