Your 2020 Ford Explorerproblems, repair costs and recalls
What we've documented about the 2020 Ford Explorer: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2020 Ford Explorer
10 documented issues apply to 2020, most serious first.
Engine block heater can leak coolant and short (recalls 25V-685, 26V-012)
- What you'll notice
- Coolant leaking near the block heater, a low coolant level, or a tripped outlet when the heater cord is plugged in.
- Why it happens
- The engine block heater can leak coolant into its electrical connection and short out.
- What to do
- Check the VIN for these recalls. Do not plug in the block heater until the repair is done.
Seat recliner may not lock (recall 19V-633)
- What you'll notice
- A seat back that does not lock firmly or moves unexpectedly.
- Why it happens
- A part in the seat recliner may be missing, so the seat back may not hold in a crash.
- What to do
- Check the VIN for this recall and get it fixed promptly.
Rear driveshaft may fracture (recall 20V-693)
- What you'll notice
- Vibration or clunking from under the vehicle, then loss of drive or the vehicle rolling in Park.
- Why it happens
- A driveshaft on some all-wheel-drive models may fracture.
- What to do
- Check the VIN for this recall and use the parking brake until it is fixed.
Rear lower control arm bolts may break (recall 21V-154)
- What you'll notice
- Clunking from the rear suspension, a change in alignment or pulling to one side.
- Why it happens
- Some rear lower control arm bolts were not heat-treated and can break, affecting handling.
- What to do
- Check the VIN for this recall and have it repaired before regular driving.
Park pawl may engage while moving (recall 26V-402)
- What you'll notice
- A sudden jolt or loss of drive while driving.
- Why it happens
- The transmission park mechanism may engage while the vehicle is moving.
- What to do
- Check the VIN for this recall and get the repair right away.
Rear axle bolt can break (recalls 22V-255, 23V-199, 23V-675)
- What you'll notice
- A loud clunk or heavy vibration from the rear when accelerating, sudden loss of drive, or the vehicle rolling while in Park.
- Why it happens
- A rear axle mounting bolt can fracture, letting the axle housing shift and the driveshaft or axle shafts disconnect. The main fix is software that sets the parking brake each time you shift to Park, and Ford extended coverage on the bolt for some vehicles.
- What to do
- Use the parking brake every time you park, check the VIN for all of these recalls, and stop driving if a new rear clunk appears.
Engine computer reset can cut power (recall 23V-069)
- What you'll notice
- A sudden loss of drive power while driving, sometimes with warning messages.
- Why it happens
- The powertrain control module can reset while driving on vehicles with the 2.3L and ten-speed automatic.
- What to do
- Check the VIN for this recall and get the software update. Pull over safely if power cuts out.
Windshield wiper motor can fail (recall 26V-117)
- What you'll notice
- Wipers that stop working, often in rain or snow.
- Why it happens
- The front wiper motor may fail.
- What to do
- Check the VIN for this recall and get the repair before driving in bad weather.
Second-row seat belt anchor bolts (recalls 25V-093, 26V-159)
- What you'll notice
- Usually no warning; a seat belt anchor may feel loose.
- Why it happens
- Second-row seat belt anchor or buckle bolts may not be installed or tightened correctly, so the belt may not hold in a crash.
- What to do
- Check the VIN for these recalls and get them done promptly.
Rearview or 360-degree camera image fails (several recalls)
- What you'll notice
- A blank, frozen, flipped or blue backup camera image.
- Why it happens
- Loose connections, wiring errors and software faults have led to many camera recalls on this generation.
- What to do
- Check the VIN for camera recalls such as 23V-342, 25V-442, 26V-123 and 24V-801. Back up using mirrors with extra care until fixed.
Repair prices for your 2020 Ford Explorer
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace engine block heater
- Replace seat recliner mechanism
- Replace rear driveshaft
- Replace rear lower control arm bolts
- Update control module software
- Replace rear axle mounting bolt
- Replace front wiper motor
- Replace rear camera
- Tighten or replace seat belt anchor bolts
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…