Ford F-250 Super Dutyproblems, repair costs and recalls
Problems reported across 1999–2026. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
25 documented issues across all years, most serious first.
Spark plug blown out of the cylinder head
- What you'll notice
- A sudden loud popping or ticking noise, a rough-running engine with a misfire light, and sometimes an ignition coil sitting loose on top of the engine.
- Why it happens
- These aluminum heads hold each spark plug with only a few threads. Over time a plug can loosen and strip them, and the plug gets pushed out of the head.
- What to do
- Stop driving if a sudden loud tick and misfire appear. A shop can repair the threads with an insert. Make sure plugs are torqued correctly at every tune-up.
Oil cooler and EGR cooler failure leading to head gasket trouble
- What you'll notice
- White, sweet-smelling exhaust smoke, a coolant level that keeps dropping with no visible leak, pressure or bubbles in the coolant bottle, and overheating when towing.
- Why it happens
- The engine oil cooler can clog inside, cutting coolant flow to the EGR cooler, which then overheats and ruptures. The resulting coolant loss and pressure can blow head gaskets on this engine.
- What to do
- Stop towing and have a diesel shop compare oil and coolant temperatures and pressure-test the cooling system. Catching a clogged oil cooler early can prevent a much larger head gasket job.
Radiator leaks, EGR cooler failure and fuel in the oil
- What you'll notice
- Coolant drips or crusty residue at the radiator, a falling coolant level, white smoke, overheating, or an oil level that rises or smells of fuel.
- Why it happens
- The factory radiator is prone to cracking, the EGR coolers wear out, and the extra fuel used to clean the particulate filter can wash past the piston rings and thin the oil.
- What to do
- Watch the coolant level and oil dipstick closely. Have leaks fixed promptly, and change the oil early if it smells of fuel. Stop driving if the engine overheats.
Violent front-end shake ('death wobble')
- What you'll notice
- After hitting a bump at highway speed on a 4x4, the steering wheel and front end shake hard side to side until you slow way down.
- Why it happens
- The solid front axle relies on a track bar, tie rods, ball joints and a steering damper. Wear or looseness in any of these lets the front wheels start oscillating. Ford issued a service bulletin for 2017-2019 trucks that replaces the steering damper.
- What to do
- Slow down gently without slamming the brakes when it happens, and have the front steering and suspension inspected before highway driving. A new damper alone can hide a worn part.
High-pressure fuel pump failure
- What you'll notice
- Sudden loss of power, the engine shutting off while driving, hard starting or no-start, sometimes with fuel-pressure codes.
- Why it happens
- The high-pressure fuel pump can wear internally and shed metal into the fuel system, which can ruin injectors and lines. Water or poor-quality fuel makes failure more likely.
- What to do
- Drain the water separator and change fuel filters on schedule. If the truck stalls or will not restart, have it towed rather than cranking it over and over.
Driveshaft damper can slip and break the driveshaft (recall)
- What you'll notice
- A new vibration, clunk or rattle from under the truck that gets worse with speed.
- Why it happens
- A balancing damper on the driveshaft of some 4x4 trucks can move out of place, unbalancing the shaft until it cracks. Ford recalled affected trucks.
- What to do
- Check the VIN for the open recall and stop driving to have the driveshaft inspected if a new vibration appears.
Fuel pump deposits can cause stalling (recall)
- What you'll notice
- Power loss, fuel-pressure warnings, stalling while driving, or a no-start.
- Why it happens
- Deposits can form on parts inside the high-pressure fuel pump, linked to biodiesel blends. Ford recalled affected trucks and later reopened the campaign for some that were repaired incorrectly.
- What to do
- Check the VIN for both recalls, even if work was done before. If the truck loses power, get off the road and have it towed.
Steering column shaft bolts may be loose or missing (recall)
- What you'll notice
- A clunk or extra free play in the steering wheel, or steering that feels disconnected.
- Why it happens
- Bolts at the upper steering shaft coupler may have been left out or not tightened at the factory, so the column could separate. Ford recalled affected trucks.
- What to do
- Do not drive if the steering feels loose. Check the VIN and have the recall done right away.
Rear axle shaft may break (recall)
- What you'll notice
- Grinding or clunking from the rear axle, loss of drive, or the truck rolling while in Park without the parking brake set.
- Why it happens
- The left rear axle shaft on some single-rear-wheel trucks may not have been heat-treated correctly and can fracture. Ford recalled affected trucks.
- What to do
- Always set the parking brake and check the VIN for the recall. Stop driving if rear-axle grinding or clunking starts.
Right rear axle shaft may break (recall)
- What you'll notice
- Grinding or clunking from the rear axle, loss of drive, or the truck rolling while in Park without the parking brake set.
- Why it happens
- The right rear axle shaft on some trucks may not have been made correctly and can fracture. Ford recalled affected trucks.
- What to do
- Always set the parking brake and check the VIN for the recall. Stop driving if rear-axle grinding or clunking starts.
Turbocharger failure on early 6.7L diesels
- What you'll notice
- A loud screech or siren-like whine from the engine, a drop in power, and blue-white smoke from the tailpipe as the turbo passes oil.
- Why it happens
- The first turbochargers on this engine used ceramic ball bearings that could break up. Ford later changed to steel bearings, which largely ended the problem.
- What to do
- Stop driving if the turbo starts screeching or the truck smokes heavily, because a failing turbo can send oil and debris into the engine. Have a diesel shop inspect it and fit the updated turbo.
Underbody insulator can wear through the aluminum driveshaft
- What you'll notice
- A vibration that builds with speed, a clunk from under the floor, and in the worst case a loud bang and loss of drive.
- Why it happens
- A heat insulator under the body can sit against the aluminum driveshaft and rub a groove in it until the tube is too thin to hold torque.
- What to do
- Stop driving and have the driveshaft and insulator inspected right away under the recall, because a broken shaft can drop and dig into the road.
Injector control module (FICM) and injector failures
- What you'll notice
- Hard or long cranking, especially when cold, rough idle, misfires, smoke, and loss of power.
- Why it happens
- The module that powers the injectors can fail, often from low battery voltage, and the injectors themselves are a known failure point on this engine.
- What to do
- Have the batteries and the module's output voltage tested before replacing injectors. Keep up with oil and fuel filter changes.
Turbocharger vanes sticking from soot
- What you'll notice
- Sluggish response from a stop, a lack of boost, or surging power, sometimes with a check engine light.
- Why it happens
- Soot builds up in the variable-vane turbocharger and makes the vanes stick, so boost is not controlled properly.
- What to do
- Have a diesel shop check boost control and clean or service the turbo. Regular highway driving and towing help keep soot down.
Rough or erratic automatic shifting
- What you'll notice
- Harsh or delayed shifts, slipping, sudden large downshifts, or the transmission dropping out of gear.
- Why it happens
- The first year of this generation drew a cluster of owner complaints about its six-speed automatic, including slipping and incorrect gear changes.
- What to do
- Have the transmission scanned for codes, check the fluid, and ask about software updates. Get it checked promptly if it slips or drops into neutral.
Tailgate can open on its own (recall)
- What you'll notice
- The tailgate drops open while driving or parked, sometimes after rain or a car wash.
- Why it happens
- Water can get into the wiring for the electric tailgate release switch and short it, which releases the latches. Ford recalled affected trucks.
- What to do
- Look up the VIN for the recall and do not carry loose cargo in the bed until it is repaired.
360-degree camera rear image too dark or washed out (recall)
- What you'll notice
- The backup camera picture is badly under- or over-exposed in certain lighting, making it hard to see behind the truck.
- Why it happens
- On trucks with the 360-degree camera system, exposure software can mis-adjust the image when the cameras see very different light. Ford recalled affected trucks for a software update.
- What to do
- Have the image module software updated under the recall, and use mirrors and look back when reversing until then.
Infotainment screen can block the backup camera (recall)
- What you'll notice
- When shifting into Reverse, the home screen stays up instead of the rear camera image.
- Why it happens
- A software error can keep the center screen from switching to the rearview camera. Ford recalled affected trucks.
- What to do
- Check the VIN for the recall and have the software updated. Use mirrors and look back while reversing until it is fixed.
Analog gauges may stick or read wrong (recall)
- What you'll notice
- The speedometer or tachometer needle sticks, jumps or reads incorrectly.
- Why it happens
- A fault in the analog instrument cluster can make the gauge needles move erratically. Ford recalled affected trucks.
- What to do
- Check the VIN for the recall. Do not rely on a jumping speedometer; have it repaired promptly.
LED headlights may fail (recall)
- What you'll notice
- A headlight goes dim, flickers or stops working.
- Why it happens
- Some headlight assemblies may have a contaminated LED chip, which can cause the light to fail. Ford recalled affected trucks.
- What to do
- Check the VIN for the recall and avoid night driving with a failed headlight until it is replaced.
Tailgate support cable may break under load (recall)
- What you'll notice
- The tailgate drops or hangs crooked when weight is put on it.
- Why it happens
- The left-side tailgate cable may fail under heavy loads and let the tailgate fall. Ford recalled affected trucks.
- What to do
- Do not load or stand on the open tailgate until the recall is done.
NOx sensor failure triggers reduced power
- What you'll notice
- A check engine light or exhaust fluid system warning, sometimes with a countdown to limited speed or noticeably reduced power.
- Why it happens
- The sensors that measure nitrogen oxides in the exhaust failed often on early trucks, and the computer cuts power when it cannot confirm the emissions system is working. Ford ran a customer program on 2011 trucks to replace sensors and update the software.
- What to do
- Have the codes read soon so the truck does not drop into a speed-limited mode. Ask a Ford dealer whether the sensor and software update were done on your truck.
Camshaft position sensor failure
- What you'll notice
- The engine cranks but will not start, or it stumbles, cuts out, or stalls while driving, often with the tachometer dropping out.
- Why it happens
- The cam sensor tells the engine computer when to fire the injectors. It is a known weak point on this engine and can fail or work intermittently.
- What to do
- Have the sensor tested and replaced; it is a fairly simple repair. Carrying a spare is a common owner habit on these trucks.
Exhaust temperature and soot filter sensors fail
- What you'll notice
- A warning light comes on and the truck drops into reduced power, often with a message about the exhaust filter. In the worst cases the engine shuts off while driving and will not restart.
- Why it happens
- The sensors that read exhaust temperature and watch the soot filter live in hot, dirty exhaust and quit early. Once the engine computer stops trusting a reading it protects itself by cutting power.
- What to do
- Get the codes read and the failed sensor replaced; the part is inexpensive next to being stranded, and many owners of these trucks carry a spare. Ford later changed the software so a bad sensor no longer shuts the engine down.
Spark plugs seize and break during removal
- What you'll notice
- No symptom while driving. The trouble appears at tune-up time, when one or more spark plugs snap and leave the lower half stuck in the cylinder head.
- Why it happens
- The original two-piece spark plugs on these 3-valve engines collect carbon around a long lower sleeve, which can lock the plug in the head so it separates when turned. Ford published a special removal procedure and extraction tool, and later engines got a redesigned head.
- What to do
- Nothing urgent. When plugs are due, use a shop that knows the Ford procedure and has the extraction tool, and replace them with the updated one-piece design.
Repair prices for your Ford F-250 Super Duty
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Repair spark plug threads with an insert, new plug and coil
- Replace engine oil cooler and EGR cooler
- Replace fuel injection control module (FICM)
- Remove and clean turbo vanes, replace unison ring
- Replace radiator
- Replace steering damper and track bar, then align
- Replace high-pressure pump, injectors and lines; clean fuel system
- Update transmission software and replace solenoid body
- Replace driveshaft
- Repair tailgate release switch and wiring
- Update engine control software
- Update camera system software
- Inspect and install or tighten steering shaft bolts
- Replace rear axle shaft
- Update infotainment software
- Replace instrument cluster
- Replace LED headlamp assembly
- Replace tailgate support cables
- Replace right rear axle shaft
- Replace spark plugs, extracting any broken plugs
- Replace turbocharger
- Replace NOx sensor and update software
- Replace camshaft position sensor
- Replace rear driveshaft and reposition insulator
- Replace exhaust gas temperature sensor
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.