Your 2003 Ford F-250 Super Dutyproblems, repair costs and recalls
What we've documented about the 2003 Ford F-250 Super Duty: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2003 Ford F-250 Super Duty
5 documented issues apply to 2003, most serious first.
Spark plug blown out of the cylinder head
- What you'll notice
- A sudden loud popping or ticking noise, a rough-running engine with a misfire light, and sometimes an ignition coil sitting loose on top of the engine.
- Why it happens
- These aluminum heads hold each spark plug with only a few threads. Over time a plug can loosen and strip them, and the plug gets pushed out of the head.
- What to do
- Stop driving if a sudden loud tick and misfire appear. A shop can repair the threads with an insert. Make sure plugs are torqued correctly at every tune-up.
Oil cooler and EGR cooler failure leading to head gasket trouble
- What you'll notice
- White, sweet-smelling exhaust smoke, a coolant level that keeps dropping with no visible leak, pressure or bubbles in the coolant bottle, and overheating when towing.
- Why it happens
- The engine oil cooler can clog inside, cutting coolant flow to the EGR cooler, which then overheats and ruptures. The resulting coolant loss and pressure can blow head gaskets on this engine.
- What to do
- Stop towing and have a diesel shop compare oil and coolant temperatures and pressure-test the cooling system. Catching a clogged oil cooler early can prevent a much larger head gasket job.
Injector control module (FICM) and injector failures
- What you'll notice
- Hard or long cranking, especially when cold, rough idle, misfires, smoke, and loss of power.
- Why it happens
- The module that powers the injectors can fail, often from low battery voltage, and the injectors themselves are a known failure point on this engine.
- What to do
- Have the batteries and the module's output voltage tested before replacing injectors. Keep up with oil and fuel filter changes.
Turbocharger vanes sticking from soot
- What you'll notice
- Sluggish response from a stop, a lack of boost, or surging power, sometimes with a check engine light.
- Why it happens
- Soot builds up in the variable-vane turbocharger and makes the vanes stick, so boost is not controlled properly.
- What to do
- Have a diesel shop check boost control and clean or service the turbo. Regular highway driving and towing help keep soot down.
Camshaft position sensor failure
- What you'll notice
- The engine cranks but will not start, or it stumbles, cuts out, or stalls while driving, often with the tachometer dropping out.
- Why it happens
- The cam sensor tells the engine computer when to fire the injectors. It is a known weak point on this engine and can fail or work intermittently.
- What to do
- Have the sensor tested and replaced; it is a fairly simple repair. Carrying a spare is a common owner habit on these trucks.
Repair prices for your 2003 Ford F-250 Super Duty
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Repair spark plug threads with an insert, new plug and coil
- Replace engine oil cooler and EGR cooler
- Replace fuel injection control module (FICM)
- Remove and clean turbo vanes, replace unison ring
- Replace camshaft position sensor
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…