Your 2006 Ford F-250 Super Dutyproblems, repair costs and recalls
What we've documented about the 2006 Ford F-250 Super Duty: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2006 Ford F-250 Super Duty
5 documented issues apply to 2006, most serious first.
Oil cooler and EGR cooler failure leading to head gasket trouble
- What you'll notice
- White, sweet-smelling exhaust smoke, a coolant level that keeps dropping with no visible leak, pressure or bubbles in the coolant bottle, and overheating when towing.
- Why it happens
- The engine oil cooler can clog inside, cutting coolant flow to the EGR cooler, which then overheats and ruptures. The resulting coolant loss and pressure can blow head gaskets on this engine.
- What to do
- Stop towing and have a diesel shop compare oil and coolant temperatures and pressure-test the cooling system. Catching a clogged oil cooler early can prevent a much larger head gasket job.
Violent front-end shake ('death wobble')
- What you'll notice
- After hitting a bump at highway speed on a 4x4, the steering wheel and front end shake hard side to side until you slow way down.
- Why it happens
- The solid front axle relies on a track bar, tie rods, ball joints and a steering damper. Wear or looseness in any of these lets the front wheels start oscillating. Ford issued a service bulletin for 2017-2019 trucks that replaces the steering damper.
- What to do
- Slow down gently without slamming the brakes when it happens, and have the front steering and suspension inspected before highway driving. A new damper alone can hide a worn part.
Injector control module (FICM) and injector failures
- What you'll notice
- Hard or long cranking, especially when cold, rough idle, misfires, smoke, and loss of power.
- Why it happens
- The module that powers the injectors can fail, often from low battery voltage, and the injectors themselves are a known failure point on this engine.
- What to do
- Have the batteries and the module's output voltage tested before replacing injectors. Keep up with oil and fuel filter changes.
Turbocharger vanes sticking from soot
- What you'll notice
- Sluggish response from a stop, a lack of boost, or surging power, sometimes with a check engine light.
- Why it happens
- Soot builds up in the variable-vane turbocharger and makes the vanes stick, so boost is not controlled properly.
- What to do
- Have a diesel shop check boost control and clean or service the turbo. Regular highway driving and towing help keep soot down.
Spark plugs seize and break during removal
- What you'll notice
- No symptom while driving. The trouble appears at tune-up time, when one or more spark plugs snap and leave the lower half stuck in the cylinder head.
- Why it happens
- The original two-piece spark plugs on these 3-valve engines collect carbon around a long lower sleeve, which can lock the plug in the head so it separates when turned. Ford published a special removal procedure and extraction tool, and later engines got a redesigned head.
- What to do
- Nothing urgent. When plugs are due, use a shop that knows the Ford procedure and has the extraction tool, and replace them with the updated one-piece design.
Repair prices for your 2006 Ford F-250 Super Duty
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace engine oil cooler and EGR cooler
- Replace fuel injection control module (FICM)
- Remove and clean turbo vanes, replace unison ring
- Replace steering damper and track bar, then align
- Replace spark plugs, extracting any broken plugs
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…