Your 2003 Ford Focusproblems, repair costs and recalls
What we've documented about the 2003 Ford Focus: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2003 Ford Focus
4 documented issues apply to 2003, most serious first.
Valve seat can drop into the cylinder
- What you'll notice
- A sudden loud knocking or clattering, a hard misfire, heavy shaking and loss of power, often with no warning beforehand.
- Why it happens
- On the base single-cam engine, a pressed-in valve seat in the cylinder head can work loose and fall into the cylinder, where it gets hammered by the piston. Overheating makes it more likely.
- What to do
- Shut the engine off right away if this happens; running it does more damage. Never let this engine overheat, and have any misfire checked promptly.
Rear door may not latch fully and can open (recall)
- What you'll notice
- A rear door that needs slamming, sits slightly proud, or pops open while driving.
- Why it happens
- The rear door latches can fail to catch completely, so the door looks closed but is not secure. Ford recalled the latches.
- What to do
- Check your VIN for this recall. Do not carry rear passengers next to a door that does not latch firmly.
Key will not turn in the ignition
- What you'll notice
- The key goes in but will not turn, or it sticks and will not come back out. It tends to get worse until the car cannot be started.
- Why it happens
- The small tumblers inside the ignition lock cylinder wear and jam.
- What to do
- Do not force the key, which can break it off. Have the lock cylinder replaced before it leaves you stranded.
Engine vibration from a worn top engine mount
- What you'll notice
- Strong vibration through the steering wheel, seats and dash at idle or in gear at a stop, sometimes with a thump when you pull away.
- Why it happens
- The upper engine mount on the passenger side wears out or its fluid-filled center leaks, so engine shake passes straight into the body.
- What to do
- Have the engine mounts inspected. It is not an emergency, but a failed mount puts extra strain on the other mounts and the exhaust.
Repair prices for your 2003 Ford Focus
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace cylinder head (or engine if cylinder is damaged)
- Replace ignition lock cylinder
- Replace upper (passenger side) engine mount
- Replace rear door latch (one door)
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…