Your 2008 Ford Focusproblems, repair costs and recalls
What we've documented about the 2008 Ford Focus: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2008 Ford Focus
3 documented issues apply to 2008, most serious first.
Engine vibration from a worn top engine mount
- What you'll notice
- Strong vibration through the steering wheel, seats and dash at idle or in gear at a stop, sometimes with a thump when you pull away.
- Why it happens
- The upper engine mount on the passenger side wears out or its fluid-filled center leaks, so engine shake passes straight into the body.
- What to do
- Have the engine mounts inspected. It is not an emergency, but a failed mount puts extra strain on the other mounts and the exhaust.
Rear end noise with uneven rear tire wear
- What you'll notice
- Clunks or a rumble from the back over bumps, and the inside or outside edges of the rear tires wear down long before the tread should be gone.
- Why it happens
- Worn rear suspension bushings and shocks let the rear wheels change angle, so the tires scrub as the car rolls.
- What to do
- Have the rear suspension checked and the alignment measured before you buy another set of tires.
Ignition switch and lock cylinder wear out
- What you'll notice
- The key will not turn, or only turns if you push it in hard, jiggle it, or pull on the steering wheel, and it can take many attempts before the engine cranks.
- Why it happens
- The tumblers in the lock cylinder and the housing behind them wear until the key no longer reaches the point where it closes the circuit. Owners report the same failure coming back after a repair that replaced only part of the assembly.
- What to do
- Try your spare key first to rule out a worn key, then have the lock cylinder and the ignition switch replaced as a set. Do not ignore it, because a switch this worn can also cut out and stall the engine.
Repair prices for your 2008 Ford Focus
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace upper (passenger side) engine mount
- Replace rear shocks and bushings, then align
- Replace ignition lock cylinder and ignition switch
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…