Your 2020 GMC Canyonproblems, repair costs and recalls
What we've documented about the 2020 GMC Canyon: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2020 GMC Canyon
3 documented issues apply to 2020, most serious first.
8-speed automatic shudders at light throttle
- What you'll notice
- A shake like driving over rumble strips at light throttle between about 25 and 80 mph, plus hunting between gears or clunky low-speed shifts.
- Why it happens
- The torque converter clutch slips and chatters as the original transmission fluid breaks down. GM bulletin 18-NA-355 calls for a full fluid exchange with an updated fluid.
- What to do
- Ask a dealer for the fluid exchange from the bulletin. Topping off with other fluid or additives won't fix it. If the shudder returns, the torque converter may need to be replaced.
Diesel particulate filter and DEF warnings
- What you'll notice
- Check engine light, a DEF or exhaust filter message, reduced power, smoke during cleaning cycles, or a speed-limit countdown.
- Why it happens
- Short trips don't let the exhaust filter burn itself clean, and DEF quality and exhaust sensors fail. A failed sensor can also stop the cleaning cycle from running.
- What to do
- Take the truck on a steady highway drive of 20 minutes or more when you can. If the warning stays, have the codes read; a sensor is cheaper than a new filter.
Diesel warning lights and no-start from rubbed-through wiring
- What you'll notice
- Several warning lights at once, a DEF message, a jumping oil pressure gauge, rough running, misfires, or the engine cranks and won't start.
- Why it happens
- The engine wiring harness on the diesel can chafe through against nearby parts. GM bulletin 22-NA-003 covers finding and repairing the damaged section.
- What to do
- Have a shop inspect the harness before replacing sensors or modules.
Repair prices for your 2020 GMC Canyon
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Full transmission fluid exchange with updated GM fluid
- Replace exhaust or DEF sensor, or particulate filter
- Inspect and repair chafed diesel engine harness
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…