Your 2016 GMC Sierra 1500problems, repair costs and recalls
What we've documented about the 2016 GMC Sierra 1500: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2016 GMC Sierra 1500
4 documented issues apply to 2016, most serious first.
Lifter failure in cylinder-deactivation engines
- What you'll notice
- A ticking or tapping from the top of the engine, a check-engine light with misfire codes, rough running, or power loss.
- Why it happens
- The special lifters that let the engine shut off cylinders to save fuel can stick or collapse. A failed lifter can also damage the camshaft. There is no recall; a class action is pending.
- What to do
- Get a misfire or new ticking checked quickly. Driving with a collapsed lifter can wipe out the camshaft and turn a smaller repair into a much bigger one.
Loss of brake assist from vacuum pump
- What you'll notice
- The brake pedal suddenly feels very hard and the truck takes longer to stop, sometimes with a brake warning message.
- Why it happens
- The engine-driven vacuum pump that powers the brake booster can lose output over time. GM recalled the trucks for a software change that uses the ABS pump to help.
- What to do
- Check for open recalls on your VIN and have the recall work done right away. If the pedal goes hard, press harder and get the truck inspected before regular use.
One wheel may brake on its own
- What you'll notice
- The truck pulls hard to one side or slows unexpectedly, often with ABS or stability warning lights.
- Why it happens
- If a wheel speed sensor fails, the stability system can wrongly apply the brake at one wheel. GM recalled affected trucks for a software fix.
- What to do
- If the truck pulls or brakes by itself, pull over safely. Check your VIN for the recall and have it repaired before regular driving.
8-speed automatic shudder and harsh shifts
- What you'll notice
- A vibration like driving over rumble strips at steady speeds with light throttle, plus clunky 1-2 shifts or a delay engaging Drive.
- Why it happens
- The original fluid in the 8-speed automatic absorbed moisture and lost its friction qualities, making the torque converter clutch grab and slip. GM changed the fluid specification and updated software.
- What to do
- Ask a dealer about GM bulletin 18-NA-355, which calls for a complete flush with updated fluid. It often cures the shudder if done before the converter is damaged.
Repair prices for your 2016 GMC Sierra 1500
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace lifters, camshaft and lifter guides
- Replace brake vacuum pump
- Flush transmission with updated fluid per GM bulletin
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…