Your 2006 Mitsubishi Lancerproblems, repair costs and recalls
What we've documented about the 2006 Mitsubishi Lancer: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2006 Mitsubishi Lancer
7 documented issues apply to 2006, most serious first.
Front crossmember rust lets control arm detach (recall)
- What you'll notice
- Clunking from the front over bumps, wandering steering, or a front wheel that suddenly tucks in because the lower control arm has broken free.
- Why it happens
- Road salt rots the front crossmember where the lower control arms bolt on. Recall 16V-458 covers 2002-2007 Lancers and 2003-2006 Evolutions, and recall 20V-279 covers 2008-2010 Lancers, in salt-belt states. CarComplaints owners also report rotted subframes.
- What to do
- Check your VIN for open recalls. A dealer inspects the crossmember and seals or replaces it free. Get any front-end clunk checked before driving far.
Free at a Mitsubishi dealer. Ask the dealer to check your VIN for open recalls.
Passenger airbag inflator can rupture (recall)
- What you'll notice
- No symptoms until a crash. In a crash, the passenger airbag inflator can burst and throw metal pieces into the cabin.
- Why it happens
- Takata passenger airbag inflators can degrade from moisture over time (recalls 17V-569 and 18V-220, which also replaced some earlier interim inflators).
- What to do
- Check your VIN now and get the free inflator replacement as soon as possible. Until then, don’t let anyone ride in the front passenger seat.
Free at a Mitsubishi dealer. Ask the dealer to check your VIN for open recalls.
Catalytic converter failure (P0420)
- What you'll notice
- A check engine light with code P0420, a failed emissions test, and sometimes a rattle or rotten-egg smell.
- Why it happens
- The catalytic converter on these Lancers loses efficiency. Mitsubishi released a converter kit and a service bulletin that also calls for reprogramming the engine computer.
- What to do
- Have a shop confirm the code with live sensor data and ask the dealer about the bulletin and computer update before replacing the converter.
Valve cover gasket oil leak and misfire
- What you'll notice
- Oil seeping from the top of the engine, a burning oil smell, or misfires and a check engine light.
- Why it happens
- The valve cover gasket hardens with age and leaks oil, including into the spark plug wells, where it causes misfires.
- What to do
- Replace the valve cover gasket and spark plug tube seals, and clean the plug wells. Check the plugs and coils for oil damage.
Radiator leak
- What you'll notice
- Steam or mist from under the hood after highway driving, coolant on the ground, or the coolant level dropping.
- Why it happens
- Owners reported leaking radiators around 35,000-50,000 miles, and in one case a radiator cap that no longer held pressure.
- What to do
- Don’t drive if it overheats. Have the cooling system pressure-tested and the radiator and cap replaced as needed.
Clear coat paint peeling
- What you'll notice
- White, cloudy patches on the paint, then the clear coat flakes off, usually on the hood, roof and trunk.
- Why it happens
- The factory clear coat breaks down with sun exposure. RepairPal lists dozens of owner reports.
- What to do
- Wash and wax regularly and park in shade. Once it peels, the panel has to be sanded and refinished.
Temperature control knob hard to turn
- What you'll notice
- The heater temperature knob gets stiff or sticks.
- Why it happens
- The knob and the heater door linkage it moves stiffen with age. RepairPal lists more than 170 owner reports, and Mitsubishi has issued a service action.
- What to do
- Don’t force the knob. Have a shop free up or replace the stuck knob or linkage.
Repair prices for your 2006 Mitsubishi Lancer
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace catalytic converter
- Replace valve cover gasket and spark plug tube seals
- Replace radiator and cap
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free dealer recall repairNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…