Your 2016 Mitsubishi Lancerproblems, repair costs and recalls
What we've documented about the 2016 Mitsubishi Lancer: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2016 Mitsubishi Lancer
7 documented issues apply to 2016, most serious first.
CVT overheating, shudder or failure
- What you'll notice
- A "slow down" or transmission warning with the check engine light, shudder or surging when pulling away, revs flaring, or loss of drive.
- Why it happens
- The CVT can overheat or let its belt slip, and early cars also had control module faults. A 2021 class action covers 2014-2017 Lancers, and Mitsubishi bulletin 20-23-001 tells dealers to replace the valve body or the CVT.
- What to do
- Pull over and let it cool if the warning appears. Have the CVT fluid and codes checked, and ask a dealer whether the 10-year/100,000-mile powertrain warranty (original owners) covers it.
Faulty relays can stall the engine (recall)
- What you'll notice
- The engine stalls, loses power or overheats without warning.
- Why it happens
- Some relays in the engine compartment were defective (recall 17V-609, 2015-2016 Lancers and 2015 Evolutions).
- What to do
- Check your VIN for the recall; the dealer replaces the relays free.
Free at a Mitsubishi dealer. Ask the dealer to check your VIN for open recalls.
CVT delays acceleration (recall)
- What you'll notice
- The car hesitates or is slow to pick up speed when you press the gas.
- Why it happens
- CVT control software could delay acceleration in some conditions (recall 16V-563).
- What to do
- Check your VIN for the recall; the dealer reprograms the CVT computer free.
Free at a Mitsubishi dealer. Ask the dealer to check your VIN for open recalls.
Stalling from dirty throttle body or bad MAP sensor
- What you'll notice
- The engine stalls when pulling away or while cruising, often with no warning light or code.
- Why it happens
- A clogged throttle body or a failing manifold pressure (MAP) sensor can confuse the engine computer.
- What to do
- Have the throttle body cleaned and the MAP sensor checked with live data. Also make sure the relay recall on 2015-2016 cars is done.
Squeaking belt from worn tensioner
- What you'll notice
- A squeak or chirp from the engine bay that is worse on cold mornings and changes with engine speed.
- Why it happens
- The automatic belt tensioner weakens and lets the serpentine belt slip.
- What to do
- Replace the tensioner and belt together. Check first for the belt recalls on 2008-2012 cars.
Exhaust leak at the front pipe gasket
- What you'll notice
- A louder exhaust or a ticking or puffing sound, especially when cold.
- Why it happens
- The ceramic donut gasket between the exhaust manifold and down pipe wears and leaks.
- What to do
- Have the joint inspected and the gasket, bolts and springs replaced.
Car pulls to one side
- What you'll notice
- The car drifts or pulls, usually to the left, even after tire rotations or alignments.
- Why it happens
- Owners report persistent pulling, especially on all-wheel-drive cars; factory alignment settings are often off.
- What to do
- Get a full four-wheel alignment from a shop experienced with these cars and check tire wear and pressures.
Repair prices for your 2016 Mitsubishi Lancer
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace CVT (continuously variable transmission)
- Replace drive belt tensioner
- Clean throttle body or replace MAP sensor
- Four-wheel alignment
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free dealer recall repairNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…