Your 2015 Mitsubishi Lancerproblems, repair costs and recalls
What we've documented about the 2015 Mitsubishi Lancer: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2015 Mitsubishi Lancer
9 documented issues apply to 2015, most serious first.
CVT overheating, shudder or failure
- What you'll notice
- A "slow down" or transmission warning with the check engine light, shudder or surging when pulling away, revs flaring, or loss of drive.
- Why it happens
- The CVT can overheat or let its belt slip, and early cars also had control module faults. A 2021 class action covers 2014-2017 Lancers, and Mitsubishi bulletin 20-23-001 tells dealers to replace the valve body or the CVT.
- What to do
- Pull over and let it cool if the warning appears. Have the CVT fluid and codes checked, and ask a dealer whether the 10-year/100,000-mile powertrain warranty (original owners) covers it.
AWC or AYC pump failure
- What you'll notice
- An AWC or AYC warning light, and the all-wheel-drive system no longer sends power between the wheels the way it should. The car may feel less stable in corners.
- Why it happens
- The pump that runs the Active Center Differential and Active Yaw Control sits exposed behind the right rear wheel and corrodes. It is the most common Evolution X fault, especially on 2008-2010 cars, often around 50,000-60,000 miles.
- What to do
- Drive gently until it is fixed. Ask a dealer whether the 10-year/100,000-mile powertrain warranty applies, and change the ACD/AYC fluid about every 30,000 miles.
Twin-clutch (TC-SST) transmission slipping or failure
- What you'll notice
- Slipping or harsh engagement, especially when cold, jerky low-speed moves, or a transmission warning light.
- Why it happens
- The 6-speed twin-clutch gearbox on the Ralliart and Evolution MR sheds metal particles that wear the clutch packs and damage the valve body. It also needs more frequent fluid service.
- What to do
- Change the transmission fluid and filter on schedule. If it slips, get a specialist diagnosis quickly; ask whether the powertrain warranty still applies.
Faulty relays can stall the engine (recall)
- What you'll notice
- The engine stalls, loses power or overheats without warning.
- Why it happens
- Some relays in the engine compartment were defective (recall 17V-609, 2015-2016 Lancers and 2015 Evolutions).
- What to do
- Check your VIN for the recall; the dealer replaces the relays free.
Free at a Mitsubishi dealer. Ask the dealer to check your VIN for open recalls.
Timing chain stretch on turbo models
- What you'll notice
- A check engine light for cam/crank timing, a rattle at startup, rough running, or in bad cases a no-start.
- Why it happens
- The timing chain on the turbocharged 2.0L stretches over time, faster when oil changes are skipped.
- What to do
- Change the oil on time with the right grade. If timing codes appear, have the chain checked before it jumps teeth.
Stalling from dirty throttle body or bad MAP sensor
- What you'll notice
- The engine stalls when pulling away or while cruising, often with no warning light or code.
- Why it happens
- A clogged throttle body or a failing manifold pressure (MAP) sensor can confuse the engine computer.
- What to do
- Have the throttle body cleaned and the MAP sensor checked with live data. Also make sure the relay recall on 2015-2016 cars is done.
Squeaking belt from worn tensioner
- What you'll notice
- A squeak or chirp from the engine bay that is worse on cold mornings and changes with engine speed.
- Why it happens
- The automatic belt tensioner weakens and lets the serpentine belt slip.
- What to do
- Replace the tensioner and belt together. Check first for the belt recalls on 2008-2012 cars.
Exhaust leak at the front pipe gasket
- What you'll notice
- A louder exhaust or a ticking or puffing sound, especially when cold.
- Why it happens
- The ceramic donut gasket between the exhaust manifold and down pipe wears and leaks.
- What to do
- Have the joint inspected and the gasket, bolts and springs replaced.
Car pulls to one side
- What you'll notice
- The car drifts or pulls, usually to the left, even after tire rotations or alignments.
- Why it happens
- Owners report persistent pulling, especially on all-wheel-drive cars; factory alignment settings are often off.
- What to do
- Get a full four-wheel alignment from a shop experienced with these cars and check tire wear and pressures.
Repair prices for your 2015 Mitsubishi Lancer
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace CVT (continuously variable transmission)
- Replace AWC/AYC hydraulic pump
- Replace timing chain, tensioner and guides
- Replace drive belt tensioner
- Clean throttle body or replace MAP sensor
- Four-wheel alignment
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Free dealer recall repairNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…