Your 1997 Porsche 911problems, repair costs and recalls
What we've documented about the 1997 Porsche 911: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1997 Porsche 911
4 documented issues apply to 1997, most serious first.
Blue smoke and oil burning from worn valve guides
- What you'll notice
- Blue smoke at cold start and the engine using more oil than normal.
- Why it happens
- On the air-cooled 993 engine, the valve guides wear from heat and the piston rings can wear too, letting oil into the cylinders.
- What to do
- Track how much oil you add. Light smoke for a moment at start-up is common; heavy smoke or much higher use means a specialist should do a leak-down test.
Clogged secondary air injection (check engine light)
- What you'll notice
- Check engine light, often with secondary air system codes, and a failed emissions inspection.
- Why it happens
- US 993s have a secondary air system that blows air into the exhaust ports. Carbon builds up in those small passages and blocks them.
- What to do
- Have the codes read. Cleaning the air passages in the cylinder heads usually fixes it, but it is a long job.
Oil leaks from valve covers and oil lines
- What you'll notice
- Oil drips under the car, burning oil smell, and in bad cases a drop in oil pressure.
- Why it happens
- Valve covers can warp from heat, and the main seals and oil line fittings age. A failed oil line fitting can dump a lot of oil.
- What to do
- Have the source found. If the oil pressure drops, stop the engine at once to avoid serious damage.
Clutch master or slave cylinder leak
- What you'll notice
- A soft or sinking clutch pedal, trouble getting into gear, or fluid near the pedal or gearbox.
- Why it happens
- The hydraulic seals in the clutch master and slave cylinders wear and leak.
- What to do
- Check the brake/clutch fluid level and have the leak found. Replace the leaking cylinder and bleed the system.
Repair prices for your 1997 Porsche 911
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Top-end rebuild with new valve guides
- Clean secondary air passages and replace check valve
- Reseal valve covers or replace oil line seals
- Replace clutch slave or master cylinder and bleed
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…