Home › Porsche › 911 › 1998
My vehicle

Your 1998 Porsche 911problems, repair costs and recalls

What we've documented about the 1998 Porsche 911: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 19984None on file rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Synthetic oil and filter changeEvery 10,000 miles or once a year; many specialists suggest more often · The 911 holds a lot of Porsche-approved oil.
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 20,000-30,000 miles · Ceramic (PCCB) brakes last longer but cost much more to replace.
Price not verified
Ask for an estimate
Rear brake pads and rotorsAbout every 25,000-35,000 miles
Price not verified
Ask for an estimate
12V battery replacementAbout every 4-6 years · Use a battery maintainer if the car sits for weeks.
Price not verified
Ask for an estimate
Spark plugs (set of 6)About every 4 years or 40,000-60,000 miles (check your manual)
Price not verified
Ask for an estimate
Engine coolant drain and refillAbout every 4-10 years depending on year (check your manual) · Needs proper bleeding of the long coolant lines.
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1998 Porsche 911

4 documented issues apply to 1998, most serious first.

Get checked1996–1998Engine3.6L air-cooled flat-6

Blue smoke and oil burning from worn valve guides

What you'll notice
Blue smoke at cold start and the engine using more oil than normal.
Why it happens
On the air-cooled 993 engine, the valve guides wear from heat and the piston rings can wear too, letting oil into the cylinders.
What to do
Track how much oil you add. Light smoke for a moment at start-up is common; heavy smoke or much higher use means a specialist should do a leak-down test.
Repair costInsufficient verified pricing for this vehicle and repair
Top-end rebuild with new valve guides. Prepare an itemized shop request.
Walk through this symptom: Blue or gray smoke from exhaust →
Get checked1996–1998Emissions3.6L air-cooled flat-6

Clogged secondary air injection (check engine light)

What you'll notice
Check engine light, often with secondary air system codes, and a failed emissions inspection.
Why it happens
US 993s have a secondary air system that blows air into the exhaust ports. Carbon builds up in those small passages and blocks them.
What to do
Have the codes read. Cleaning the air passages in the cylinder heads usually fixes it, but it is a long job.
Repair costInsufficient verified pricing for this vehicle and repair
Clean secondary air passages and replace check valve. Prepare an itemized shop request.
Walk through this symptom: Check engine light on →
Get checked1996–1998Engine3.6L air-cooled flat-6

Oil leaks from valve covers and oil lines

What you'll notice
Oil drips under the car, burning oil smell, and in bad cases a drop in oil pressure.
Why it happens
Valve covers can warp from heat, and the main seals and oil line fittings age. A failed oil line fitting can dump a lot of oil.
What to do
Have the source found. If the oil pressure drops, stop the engine at once to avoid serious damage.
Repair costInsufficient verified pricing for this vehicle and repair
Reseal valve covers or replace oil line seals. Prepare an itemized shop request.
Walk through this symptom: Engine oil leak →
Get checked1996–1998Transmission

Clutch master or slave cylinder leak

What you'll notice
A soft or sinking clutch pedal, trouble getting into gear, or fluid near the pedal or gearbox.
Why it happens
The hydraulic seals in the clutch master and slave cylinders wear and leak.
What to do
Check the brake/clutch fluid level and have the leak found. Replace the leaking cylinder and bleed the system.
Repair costInsufficient verified pricing for this vehicle and repair
Replace clutch slave or master cylinder and bleed. Prepare an itemized shop request.
Price guide

Repair prices for your 1998 Porsche 911

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Top-end rebuild with new valve guides
  • Clean secondary air passages and replace check valve
  • Reseal valve covers or replace oil line seals
  • Replace clutch slave or master cylinder and bleed
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1998 Porsche 911
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1998 Porsche 911 as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.