Your 1999 Ram 1500problems, repair costs and recalls
What we've documented about the 1999 Ram 1500: problems owners and shops report, typical repair and upkeep costs, and safety recalls. Sold as Dodge Ram 1500 through 2010.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 1999 Ram 1500
5 documented issues apply to 1999, most serious first.
Automatic transmission slipping or failing (46RE/47RE)
- What you'll notice
- Slipping, harsh or delayed shifts, loss of overdrive, a clunk going into gear, or fluid leaks, often after towing.
- Why it happens
- The four-speed automatics in these trucks have weak spots in the torque converter, overdrive and reverse parts, and cooler lines, and they handle heat and heavy loads poorly.
- What to do
- Stop towing and have the transmission diagnosed right away. Keep the fluid fresh; a rebuild with upgraded parts is the usual fix once it slips.
Intake plenum gasket leak (Magnum V8/V6)
- What you'll notice
- The engine burns oil, puffs blue smoke, pings under load, idles rough or misfires (often on one cylinder) and fouls spark plugs.
- Why it happens
- The intake manifold has a steel bottom plate sealed by a gasket that wears out. Once it leaks, the engine pulls oil and unmetered air into the cylinders.
- What to do
- Have the plenum gasket checked and repaired with an updated plate or kit before oily exhaust clogs the catalytic converter or the engine overheats.
Camshaft position sensor failure (Magnum)
- What you'll notice
- Hard starting or no-start, stalling while driving, rough idle, and a check engine light.
- Why it happens
- The cam sensor fails or gets fouled, so the computer loses track of engine timing.
- What to do
- Have the codes read. A failed cam sensor is an inexpensive part, but stalling in traffic is a hazard, so do not put it off.
Ticking from broken exhaust manifold bolts
- What you'll notice
- A tapping or ticking noise, loudest on a cold start, that can sound like a lifter. You may also smell exhaust under the hood.
- Why it happens
- Bolts holding the exhaust manifold to the cylinder head snap with repeated heating and cooling, and the joint leaks.
- What to do
- Have the broken bolts and gasket replaced before the leak burns the gasket area, upsets oxygen sensor readings or lets fumes reach the cab.
Cracked dashboard
- What you'll notice
- Cracks open up across the top of the dash and spread until chunks of plastic break loose.
- Why it happens
- The dash plastic on these trucks turns brittle after years of sun and heat cycles.
- What to do
- Cosmetic in most cases. A molded dash cap or replacement top panel is the usual repair; remove loose sharp pieces near the airbag area.
Repair prices for your 1999 Ram 1500
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Repair intake plenum with updated plate or gasket kit
- Replace transmission with a remanufactured 46RE/47RE unit
- Replace camshaft position sensor (in the distributor)
- Extract broken manifold bolts and replace gasket
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…