Home › Ram › 1500 › 2002
My vehicle

Your 2002 Ram 1500problems, repair costs and recalls

What we've documented about the 2002 Ram 1500: problems owners and shops report, typical repair and upkeep costs, and safety recalls. Sold as Dodge Ram 1500 through 2010.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 200271 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeEvery 5,000–10,000 miles (follow the oil-life monitor) · The Hemi takes about 7 quarts, so parts run higher. The 3.0L EcoDiesel needs a special diesel-rated synthetic oil and costs more.
Price not verified
Ask for an estimate
Front brake padsAbout every 30,000–60,000 miles · Rotors add more if they are worn.
Price not verified
Ask for an estimate
Rear brake padsAbout every 40,000–70,000 miles · Some older trucks use rear drum brakes instead.
Price not verified
Ask for an estimate
Battery replacementAbout every 4–5 years · Start-stop trucks need an AGM battery; eTorque models also have a separate 48V battery.
Price not verified
Ask for an estimate
Spark plug replacementAbout every 100,000 miles on newer engines · The 5.7L Hemi has two plugs per cylinder (16 total).
Price not verified
Ask for an estimate
Cooling system flush and refillFollow the owner's manual schedule
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2002 Ram 1500

7 documented issues apply to 2002, most serious first.

Stop soon2002–2008Cooling4.7L V8

Overheating and head gasket failure (4.7L)

What you'll notice
Temperature gauge climbing, coolant loss, white exhaust smoke, or milky oil.
Why it happens
The 4.7L does not tolerate overheating well; a clogged or cracked radiator or low coolant can lead to blown head gaskets or cracked heads.
What to do
Pull over and shut the engine off if it overheats. Keep the cooling system in good shape and fix leaks right away.
Repair costInsufficient verified pricing for this vehicle and repair
Replace both head gaskets and have the heads checked. Prepare an itemized shop request.
Walk through this symptom: Engine overheating →
Get checked1996–2003Engine3.9L V6, 5.2L and 5.9L Magnum V8

Intake plenum gasket leak (Magnum V8/V6)

What you'll notice
The engine burns oil, puffs blue smoke, pings under load, idles rough or misfires (often on one cylinder) and fouls spark plugs.
Why it happens
The intake manifold has a steel bottom plate sealed by a gasket that wears out. Once it leaks, the engine pulls oil and unmetered air into the cylinders.
What to do
Have the plenum gasket checked and repaired with an updated plate or kit before oily exhaust clogs the catalytic converter or the engine overheats.
Repair costInsufficient verified pricing for this vehicle and repair
Repair intake plenum with updated plate or gasket kit. Prepare an itemized shop request.
Get checked1996–2003Engine3.9L, 5.2L and 5.9L Magnum

Camshaft position sensor failure (Magnum)

What you'll notice
Hard starting or no-start, stalling while driving, rough idle, and a check engine light.
Why it happens
The cam sensor fails or gets fouled, so the computer loses track of engine timing.
What to do
Have the codes read. A failed cam sensor is an inexpensive part, but stalling in traffic is a hazard, so do not put it off.
Repair costInsufficient verified pricing for this vehicle and repair
Replace camshaft position sensor (in the distributor). Prepare an itemized shop request.
Get checked1996–2012ExhaustMagnum engines, 3.7L V6, 4.7L V8, 5.7L Hemi V8

Ticking from broken exhaust manifold bolts

What you'll notice
A tapping or ticking noise, loudest on a cold start, that can sound like a lifter. You may also smell exhaust under the hood.
Why it happens
Bolts holding the exhaust manifold to the cylinder head snap with repeated heating and cooling, and the joint leaks.
What to do
Have the broken bolts and gasket replaced before the leak burns the gasket area, upsets oxygen sensor readings or lets fumes reach the cab.
Repair costInsufficient verified pricing for this vehicle and repair
Extract broken manifold bolts and replace gasket. Prepare an itemized shop request.
Get checked2002–2008Suspension

Worn front ball joints and tie rods

What you'll notice
Clunking over bumps, wandering on the highway, uneven front tire wear, or a loose steering feel.
Why it happens
The front ball joints and tie rod ends on this generation wear out early, especially on heavier 4x4 trucks.
What to do
Have the front end inspected. A badly worn ball joint can separate, so replace worn parts promptly and get an alignment afterward.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front upper and lower ball joints and tie rod ends. Prepare an itemized shop request.
Monitor1996–2005Body

Cracked dashboard

What you'll notice
Cracks open up across the top of the dash and spread until chunks of plastic break loose.
Why it happens
The dash plastic on these trucks turns brittle after years of sun and heat cycles.
What to do
Cosmetic in most cases. A molded dash cap or replacement top panel is the usual repair; remove loose sharp pieces near the airbag area.
Monitor2002–2008HVAC

Blend door problems cause weak or one-temperature airflow

What you'll notice
Heat or A/C stays stuck at one temperature, comes from the wrong vents, or is weak; you may hear clicking behind the dash.
Why it happens
The blend or recirculation doors behind the dash, or the small motors that move them, stop working properly.
What to do
Have the HVAC doors and actuators checked. It is not a safety issue unless the defroster cannot clear the windshield.
Repair costInsufficient verified pricing for this vehicle and repair
Replace HVAC blend door actuator. Prepare an itemized shop request.
Price guide

Repair prices for your 2002 Ram 1500

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Repair intake plenum with updated plate or gasket kit
  • Replace camshaft position sensor (in the distributor)
  • Extract broken manifold bolts and replace gasket
  • Replace front upper and lower ball joints and tie rod ends
  • Replace HVAC blend door actuator
  • Replace both head gaskets and have the heads checked
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2002 Ram 1500
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2002 Ram 1500 as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.