Your 2006 Subaru Foresterproblems, repair costs and recalls
What we've documented about the 2006 Subaru Forester: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2006 Subaru Forester
7 documented issues apply to 2006, most serious first.
Head gasket leaks
- What you'll notice
- Coolant that keeps going down, a sweet smell after driving, the temperature gauge climbing, or oil and coolant seeping where the cylinder heads meet the engine block.
- Why it happens
- The non-turbo 2.5L boxer engine of this era is known for head gasket failure as it ages. Earlier engines tended to leak internally and overheat, while later ones more often seeped oil or coolant on the outside first.
- What to do
- Have a cooling system pressure test and inspection at the first sign of seepage or coolant loss. If the engine overheats, pull over and shut it off, because driving hot can warp the heads.
Front control arm brackets can rust and break
- What you'll notice
- Clunking from the front end, loose or wandering steering, or nothing at all until a bracket gives way.
- Why it happens
- In salt-belt states the brackets that hold the front lower control arms can corrode badly. Subaru recalled affected vehicles to inspect, rustproof or replace the arms.
- What to do
- Check your VIN for an open recall. If the front end clunks or the steering feels loose, have it inspected before driving further.
Turbocharger failure from oil starvation
- What you'll notice
- Blue smoke from the exhaust, a siren-like whine or loss of boost, and sometimes check engine codes for cam timing (P0011 or P0021).
- Why it happens
- A small filter screen in the banjo bolt that feeds oil to the turbo can clog with sludge, starving the turbo of oil. Skipped or late oil changes make it much more likely.
- What to do
- Stop driving hard and have it checked right away if you see smoke or lose boost. A shop can inspect or replace the oil feed screen, and regular oil changes with the correct oil are the best prevention.
AWD binding in tight turns (automatic)
- What you'll notice
- In slow, tight turns such as parking lots the car feels like it is braking itself, hops, or shudders, and it may get worse as the transmission warms up.
- Why it happens
- On automatic models the center clutch pack that splits power front to rear can stay locked up, often from a weak duty C solenoid, worn clutch plates, or mismatched tire sizes.
- What to do
- Make sure all four tires match in brand, size and wear, then have a Subaru-savvy shop check the transmission fluid and the AWD solenoid. Ongoing binding wears the drivetrain, so do not ignore it.
Catalytic converter failure (P0420)
- What you'll notice
- Check engine light with code P0420, a failed emissions test, or sometimes a rattle from under the car.
- Why it happens
- Owners of this generation frequently report worn-out catalytic converters, sometimes made worse by misfires or an engine burning oil or coolant.
- What to do
- Have the code confirmed and the oxygen sensors and engine checked for misfires or head gasket problems first, so a new converter is not ruined.
Wheel bearing hum
- What you'll notice
- A humming or growling noise that rises with speed and may change when you steer left or right.
- Why it happens
- Owners of this generation commonly report worn wheel bearings, especially in the rear.
- What to do
- Have the bearings checked soon. A badly worn bearing can overheat and affect wheel stability.
Rattling exhaust heat shields
- What you'll notice
- A tinny buzz or rattle from under the car at certain engine speeds, often at idle or light acceleration.
- Why it happens
- The thin heat shields around the exhaust rust at their mounting points and come loose.
- What to do
- Have a shop secure the shield with a clamp or replace it. This is usually a quick, simple repair.
Repair prices for your 2006 Subaru Forester
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace both head gaskets and resurface heads
- Replace AWD transfer (duty C) solenoid
- Replace front lower control arms per recall
- Replace front catalytic converter (Y-pipe)
- Replace front wheel bearing
- Replace turbocharger and oil feed line
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…