Toyota Tacomaproblems, repair costs and recalls
Problems reported across 1996–2026. Pick your model year below to see what applies to your vehicle.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
36 documented issues across all years, most serious first.
Severe frame rust
- What you'll notice
- Flaking, scaling or soft spots on the frame, often near the rear spring mounts and crossmembers. In bad cases the frame cracks or rusts through and suspension mounts can let go.
- Why it happens
- Frames on first-generation trucks were not protected well enough against corrosion, especially where road salt is used. Toyota ran an extended frame corrosion program with frame replacement or buyback for badly rusted trucks.
- What to do
- Have the whole frame checked from underneath, including tapping suspect areas. If it is soft or perforated, stop driving the truck until it is repaired, and ask a Toyota dealer whether any program still applies to your VIN.
Front lower ball joint can separate
- What you'll notice
- Clunking or knocking from the front end over bumps, loose or wandering steering. If the joint comes apart, the wheel can fold under the truck.
- Why it happens
- The lower ball joint surface could be scratched during assembly, letting the joint wear and loosen until it pulls out. Toyota recalled these trucks to replace the lower ball joints.
- What to do
- Check the VIN for open recalls. Any front clunk on these trucks should be inspected right away, and do not drive it far if the ball joints are loose.
Free under recall 05V-225 (2001-2004 trucks): dealers replace the front lower ball joints. Check your VIN with a Toyota dealer first.
Frame rust-through
- What you'll notice
- Heavy scaling, holes or cracks in the frame, especially near the rear leaf spring hangers and crossmembers. Rusted brake lines may be found nearby.
- Why it happens
- These frames also lacked enough corrosion protection. Toyota extended frame coverage under warranty enhancement ZH6 and later settled a class action that paid for frame inspections and replacements.
- What to do
- Have the frame inspected thoroughly. If the frame is perforated or the spring mounts are weak, park the truck until it is repaired. Ask a Toyota dealer whether your VIN still has any coverage.
Rear leaf spring can break
- What you'll notice
- A bang or clunk from the rear, the truck sitting lower on one side, or a rear end that sags under load.
- Why it happens
- The rear leaf spring can crack and break. A broken piece can shift and puncture the fuel tank. Toyota recalled Pre-Runner and 4x4 trucks to inspect and replace the springs.
- What to do
- Check the VIN for recall 14V604. If the truck sits uneven or you smell fuel, do not haul or tow and get it inspected right away.
Free under recall 14V-604 for affected 2005-2011 trucks. Check your VIN with a Toyota dealer first.
Rear differential can leak and lock up
- What you'll notice
- Oil on the rear differential or dripping under the rear axle, whining or grinding from the rear, and in the worst case the rear wheels locking.
- Why it happens
- Nuts holding the differential carrier could loosen and let oil escape. Without oil the differential can be damaged or seize. Toyota recalled these trucks.
- What to do
- Check the VIN for this recall. If you see oil on the rear axle or hear grinding, stop driving and have it towed in.
Free under recall 17V-285: dealers inspect and repair the rear differential. Check your VIN with a Toyota dealer first.
Brake master cylinder can leak inside
- What you'll notice
- A soft brake pedal that sinks toward the floor, longer stopping distances, and possibly a brake warning light.
- Why it happens
- A seal in the master cylinder from one supplier was machined wrong, so fluid can bypass inside and weaken the front brakes. Toyota recalled affected trucks.
- What to do
- Check the VIN for open recalls. If the pedal sinks, do not drive the truck until it is repaired.
Free under recall 18V-888: dealers replace the master cylinder. Check your VIN with a Toyota dealer first.
Rear axle shaft can come loose
- What you'll notice
- Grinding or clunking from a rear wheel, a wobble, or a rear wheel that moves out from the truck.
- Why it happens
- Debris during assembly could keep the axle retaining nuts from staying tight, so the axle shaft can pull away from the housing. That hurts stability and braking. Toyota recalled these trucks.
- What to do
- Check the VIN for this recall. If you hear grinding from a rear wheel, stop driving and have it towed.
Free under recall 24V-152: dealers inspect and tighten or repair the rear axle. Check your VIN with a Toyota dealer first.
New 8-speed automatic slips into neutral or won't shift
- What you'll notice
- The truck suddenly loses drive or acts like it is in neutral, feels sluggish, or stays stuck in one gear, with a check engine light.
- Why it happens
- Some early trucks had transmission failures, sometimes at very low mileage. Toyota issued a service bulletin covering the related trouble codes.
- What to do
- If the truck loses drive, pull over safely and have it towed. Ask a Toyota dealer to check for bulletin T-SB-0076-24.
Rear brake hose can be damaged by mud
- What you'll notice
- Brake fluid wetting the inside of a rear wheel, a low brake fluid warning, or a soft pedal.
- Why it happens
- Mud and dirt packed inside the rear wheels can rub through the rear brake hoses and cause a fluid leak. Toyota recalled 4WD trucks to replace both hoses.
- What to do
- Check the VIN for this recall. If the pedal is soft or the brake light is on, do not drive until it is repaired.
Free under recall 25V-058: dealers replace both rear brake hoses. Check your VIN with a Toyota dealer first.
Front driveshaft CV joint can break
- What you'll notice
- Clicking or clunking from the front when turning, vibration, or a truck that rolls in Park on full-time 4WD models.
- Why it happens
- The joint on the front driveshafts can deform and break. That can affect steering, and on full-time 4WD trucks the truck may roll if the parking brake is not set. Toyota recalled affected trucks.
- What to do
- Check the VIN for this recall and always set the parking brake until it is repaired.
Free under recall 25V-656: dealers replace both front driveshafts as needed. Check your VIN with a Toyota dealer first.
Front suspension support can crack (recall)
- What you'll notice
- Clunking from the front end, steering that pulls or wanders, or a front wheel that looks out of position.
- Why it happens
- A front suspension support on early trucks can crack under certain driving conditions, which can lead to loss of control. Toyota recalled them to repair the support.
- What to do
- Check the VIN for this recall, since many old trucks were never brought in. If the front end clunks or the steering feels loose, have it inspected before driving further.
Free under recall 96V-129. Check your VIN with a Toyota dealer first.
Fuel pump in the tank can fail (recall)
- What you'll notice
- Rough running, hesitation, a check engine light, the engine stalling while driving, or not starting.
- Why it happens
- The low-pressure fuel pump inside the tank can stop working. Toyota recalled the trucks to fit an improved pump, and later widened the recall to more model years.
- What to do
- Check the VIN for this recall and have the pump replaced. If the engine stumbles or stalls, stop driving and have the truck towed in.
Free under recall 20V-682 or 20V-012: dealers replace the fuel pump. Check your VIN with a Toyota dealer first.
Valve springs can break and stall the engine (recall)
- What you'll notice
- A tick or misfire, rough running, then the engine cutting out while driving.
- Why it happens
- Some valve springs were made out of spec and can break, which stops the valve working properly.
- What to do
- Check your VIN for this recall and have it done. A stall in traffic is a real risk.
Free under recall 13V-557: dealers replace the valve springs. Check your VIN with a Toyota dealer first.
Crankshaft position sensor can fail and stall the V6 (recall)
- What you'll notice
- A no-start, or the engine suddenly cutting out while driving.
- Why it happens
- The crank position sensor on the V6 can fail, so the engine computer loses the signal it needs to run.
- What to do
- Check your VIN for this recall. Do not ignore a stall, and get the sensor replaced free.
Free under recall 17V-356: dealers replace the sensor. Check your VIN with a Toyota dealer first.
Spare tire carrier can rust and drop the spare
- What you'll notice
- Rattling from under the rear of the truck, a spare tire hanging low, or the spare missing altogether.
- Why it happens
- A plate in the spare tire hoist did not get enough protective coating at the factory. Road salt corrodes it until it breaks and the spare can fall onto the road. Toyota recalled trucks in cold-climate states to replace the carrier.
- What to do
- Check the VIN for this recall and look at how the spare is hanging. Have the carrier replaced if it is rusty or loose.
Free under recall 12V-542 for trucks sold or registered in salt-belt states: dealers inspect and replace the lift plate as needed. Check your VIN with a Toyota dealer first.
Excess frame corrosion in salt states
- What you'll notice
- More rust on the frame than you would expect for the truck's age, flaking scale, or open rust holes.
- Why it happens
- Trucks driven in cold, salted states could corrode faster than normal. Toyota ran a limited service campaign to inspect frames, apply a rust-resistant coating and plugs, and replace the frame if the rust was already severe.
- What to do
- Ask a Toyota dealer whether your truck is covered by the frame corrosion campaign and have the frame inspected. Keep the underside rinsed in winter.
Driveshaft U-joint vibration
- What you'll notice
- Vibration through the floor or seat that rises with speed, or squeaking and clunking from under the truck.
- Why it happens
- The universal joints on the driveshaft can wear. Toyota set up a customer support program because a worn joint can damage the driveshaft if ignored.
- What to do
- Have the U-joints checked for play. Ask a Toyota dealer whether the support program still applies to your VIN.
Secondary air injection pump failure
- What you'll notice
- Check engine light with codes P2440 or P2442, sometimes the truck going into reduced power for a short time after a cold start.
- Why it happens
- Moisture gets into the air injection pump and its valve, which then stick or fail. Toyota issued a bulletin and extended coverage on the system.
- What to do
- Have the codes read and ask a Toyota dealer whether your truck has extended coverage for the air injection system.
Automatic hunts for gears or engages late
- What you'll notice
- The 6-speed automatic keeps shifting up and down on hills or at steady speed, hesitates when you press the gas, or is slow to engage when shifted into Drive or Reverse.
- Why it happens
- The transmission is programmed to stay in high gears for fuel economy. Toyota issued bulletins for delayed engagement and other shift complaints.
- What to do
- Ask a Toyota dealer whether a software update or bulletin applies to your truck.
Shock absorber reservoir can corrode off
- What you'll notice
- A shock reservoir hanging loose or missing, oil on the shock, or a bouncier ride.
- Why it happens
- The metal flange holding the external oil reservoir on the front and rear shocks can corrode and fail, letting the reservoir drop onto the road. Toyota recalled affected trucks.
- What to do
- Check the VIN for this recall and look at the shocks for loose reservoirs or leaks.
Free under recall 26V-514: dealers inspect and replace front and rear shocks as needed. The fix is phased. Check your VIN with a Toyota dealer first.
Fuel inlet hose can be damaged in a side crash (Double Cab recall)
- What you'll notice
- Usually nothing in normal driving. After a side impact there may be a fuel smell or a leak near the filler.
- Why it happens
- On Double Cab trucks the body can press into the fuel inlet hose in a side collision and cause a leak. Toyota recalled them to add a protector over the hose.
- What to do
- Check the VIN to confirm the recall was done. Any fuel smell after a collision should be inspected before the truck is driven again.
Free under recall 03V-146: dealers install a fuel inlet hose protector. Check your VIN with a Toyota dealer first.
Child seat top anchor welds may be weak (recall)
- What you'll notice
- No warning signs. A child seat could shift in a hard stop or a crash.
- Why it happens
- The welds on the upper child seat anchors may not be strong enough. Toyota recalled the trucks to inspect the anchors and reweld them if needed.
- What to do
- Check the VIN for this recall before using a child seat with the top tether, and have the anchors inspected soon.
Free under recall 22V-520: dealers inspect and reweld as needed. Check your VIN with a Toyota dealer first.
Steering wheel spiral cable can lose its airbag connection (recall)
- What you'll notice
- An airbag warning light, sometimes with steering wheel buttons or the horn not working.
- Why it happens
- The spiral cable inside the steering column links the driver airbag to the rest of the truck. Its connection can come apart, which switches off the driver airbag.
- What to do
- Check the VIN for this recall and have the cable inspected soon. An airbag light that stays on means the airbag may not work in a crash.
Free under recall 23V-480 or 25V-040: dealers inspect and replace the spiral cable as needed. Check your VIN with a Toyota dealer first.
Instrument cluster can start up blank (recall)
- What you'll notice
- The digital gauge display stays dark or missing at startup, so the speed, brake warning and tire pressure lights are not shown.
- Why it happens
- A software error can keep the instrument panel from loading when the truck is started. Toyota recalled the trucks for a software update.
- What to do
- Check the VIN for this recall and get the update. If the display is blank, switch the truck off and restart it before driving.
Free under recall 25V-595: dealers update the cluster software. Check your VIN with a Toyota dealer first.
Trailer wiring converter can short out (recall)
- What you'll notice
- Blown fuses, trailer lights that do not work, or a burning smell near the hitch wiring.
- Why it happens
- The trailer wiring converter fitted behind the bumper can short circuit.
- What to do
- Check your VIN for this recall. Stop towing until the wiring has been checked.
Free under recall 01E-041: dealers install a redesigned converter. Check your VIN with a Toyota dealer first.
Rear axle seals leak onto the brakes
- What you'll notice
- Oily streaks on the inside of a rear wheel, a gear oil smell, and rear brakes that grab, pull to one side or stop working well once the fluid soaks them.
- Why it happens
- The seals at the outer ends of the rear axle harden with age and let differential oil creep past the bearing into the brake drum.
- What to do
- Have the seals replaced, along with the brake shoes if they are soaked, and the axle bearing checked at the same time. Keep an eye on the differential oil level until it is fixed.
Rear leaf springs squeak
- What you'll notice
- Squeaking or creaking from the rear over bumps, driveway entrances or when loading the bed.
- Why it happens
- The leaf spring leaves rub against each other. Toyota released updated silencer pads between the leaves.
- What to do
- Have a shop install the updated spring silencer pads. Also check the springs for cracks while they are in there.
Clunk or bump when starting or stopping
- What you'll notice
- A single clunk, or a feeling like being bumped from behind, as you pull away or come to a stop.
- Why it happens
- The sliding joint on the driveshaft gets dry and sticks, then releases with a jolt. Toyota issued bulletins for cleaning and greasing it on 2WD and 4WD trucks.
- What to do
- Ask a shop to clean and grease the driveshaft slip joint. It is annoying rather than dangerous.
Steering shaft rattle
- What you'll notice
- A rattle or clunk felt in the steering wheel on rough roads, sometimes with steering that feels a bit notchy.
- Why it happens
- The joint in the steering intermediate shaft wears and develops play. Toyota issued a bulletin for the rattle.
- What to do
- Have the intermediate steering shaft checked and replaced if it has play.
Headlight lens melting or bubbling
- What you'll notice
- Warped, bubbled or cracked plastic inside the headlight, a burnt plastic smell, or a dim beam.
- Why it happens
- Heat from the daytime running light bulb can distort the inner lens of the headlight. Toyota issued bulletins and an extended warranty for the headlights.
- What to do
- Inspect both headlights and replace damaged units. Ask a dealer whether the extended headlight warranty covers your truck.
Differential whine or grinding
- What you'll notice
- A whine from the rear at highway speed, or a grinding or groaning from the front while driving in 2WD on a 4WD truck.
- Why it happens
- Toyota issued separate bulletins for rear differential whine on certain 4WD Double Cabs and for front differential noise in 2WD mode.
- What to do
- Have a dealer check the noise against the bulletins. Make sure the recall above has also been done.
Vibration when slowing down
- What you'll notice
- A shudder or vibration felt in the truck as it slows from about 30 mph down to 10 mph.
- Why it happens
- Toyota issued bulletins for this vibration on automatic trucks during deceleration.
- What to do
- Have a dealer confirm the condition and apply the bulletin repair.
Vacuum pump knock or idle surge
- What you'll notice
- A knocking noise from the engine bay, or engine speed surging at idle when you turn the steering wheel.
- Why it happens
- Toyota issued separate bulletins for a knocking brake vacuum pump and for idle surge with steering input on this engine.
- What to do
- Have a dealer check for the matching bulletin. The pump feeds brake assist, so get a loud knock looked at.
Manual gearbox hard to shift from 5th or 6th
- What you'll notice
- The 6-speed manual is hard to pull out of 5th or 6th gear after a long drive.
- Why it happens
- Toyota issued a bulletin for this shifting problem on the manual transmission.
- What to do
- Ask a dealer to check the truck against the bulletin.
Suspension squeaks and howls
- What you'll notice
- Squeaking from the rear springs over bumps or when loading the bed, or a howl or whistle from the front at about 25 to 45 mph.
- Why it happens
- Toyota issued bulletins for rear leaf spring squeak and for noise from the front lower control arms.
- What to do
- Have a dealer apply the matching bulletin repair.
Owner's manual misstates the airbag on-off switch (recall)
- What you'll notice
- Nothing on the truck itself.
- Why it happens
- The printed instructions for using the passenger airbag on-off switch were wrong, so the switch may be used incorrectly.
- What to do
- Get the corrected manual insert from a dealer and read it before switching the passenger airbag off.
Recall 98V-188: Toyota supplies a corrected owner's manual. Call Toyota or a dealer if you never got one.
Repair prices for your Toyota Tacoma
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace frame and transfer body, suspension and lines
- Clean, treat and rustproof frame
- Install updated rear leaf spring silencer pads
- Clean and grease driveshaft slip joint
- Replace driveshaft U-joints
- Replace intermediate steering shaft
- Replace headlight assembly
- Replace secondary air pump and switching valve
- Rebuild or replace rear differential gears and bearings
- Reprogram engine and transmission control software
- Install updated rear spring pads per bulletin
- Replace rear axle seals and soaked brake shoes
Recall repairs: usually free at the dealer
A dealer can confirm coverage by VIN. An eligible safety recall repair is provided at no charge.
- Replace front lower ball joints (both sides) and alignNo charge if your vehicle is included
- Replace spare tire carrier or lift plateNo charge if your vehicle is included
- Replace both rear leaf spring assembliesNo charge if your vehicle is included
- Reseal rear differential carrier and refill gear oilNo charge if your vehicle is included
- Replace brake master cylinder and bleed brakesNo charge if your vehicle is included
- Inspect rear axle, tighten nuts, replace damaged partsNo charge if your vehicle is included
- Replace both rear brake hoses and bleed brakesNo charge if your vehicle is included
- Replace front driveshaft assembliesNo charge if your vehicle is included
- Replace front and rear shock absorbersNo charge if your vehicle is included
- Inspect and reinforce or replace front suspension supportNo charge if your vehicle is included
- Install fuel inlet hose protectorNo charge if your vehicle is included
- Replace in-tank fuel pumpNo charge if your vehicle is included
- Inspect and reweld child seat top anchorsNo charge if your vehicle is included
- Replace steering wheel spiral cable (clock spring)No charge if your vehicle is included
- Update instrument cluster softwareNo charge if your vehicle is included
- Replace trailer wiring converter and harnessNo charge if your vehicle is included
- Supply corrected owner's manual insertNo charge if your vehicle is included
- Inspect and replace valve springsNo charge if your vehicle is included
- Replace crankshaft position sensorNo charge if your vehicle is included
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.