P0311 Cylinder 11 Misfire Detected
What it means
The computer noticed that cylinder 11 isn't firing properly, so it isn't adding its share of power. If the check engine light is flashing, ease off and stop driving soon, because unburned fuel can overheat the catalytic converter.
Can I keep driving?
If the check engine light is flashing or the engine is shaking hard, pull over when it's safe and turn the engine off. Don't keep driving; a heavy misfire can overheat and ruin the catalytic converter and leave you without power in traffic. Have it towed or checked right away.
Otherwise: If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Pull the spark plug for that cylinder and look for wear, oil or carbon
- Swap the coil with a neighboring cylinder and see if the misfire moves with it
- Run a compression test if plugs and coils check out
- On V6 and V8 engines, rear-bank plugs and coils may sit under the intake plenum, which adds labor
Signs you may notice
- Check engine light on, and it may flash while the misfire is happening
- Rough or shaky idle
- Hesitation or stumble when accelerating
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWorn or fouled spark plug in cylinder 11
- CommonFailing ignition coil or plug wire for cylinder 11
- PossibleClogged or leaking fuel injector for cylinder 11
- PossibleVacuum leak near that cylinder's intake port
- PossibleLow compression from a burnt valve, worn rings or head gasket problem
Typical repair once the cause is confirmed
Usually a new spark plug and/or ignition coil for that cylinder; if the misfire stays put after those, check the injector and compression.
Common questions
What does P0311 mean?
The computer noticed that cylinder 11 isn't firing properly, so it isn't adding its share of power. If the check engine light is flashing, ease off and stop driving soon, because unburned fuel can overheat the catalytic converter.
Can I drive with code P0311?
If the check engine light is flashing or the engine is shaking hard, pull over when it's safe and turn the engine off. Don't keep driving; a heavy misfire can overheat and ruin the catalytic converter and leave you without power in traffic. Have it towed or checked right away. Otherwise: If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P0311?
Common possibilities to test include: worn or fouled spark plug in cylinder 11; failing ignition coil or plug wire for cylinder 11; clogged or leaking fuel injector for cylinder 11; vacuum leak near that cylinder's intake port. A shop should confirm the cause before replacing parts.