Home › Code lookup › P0317
Powertrain code · Computer

P0317 Rough Road Hardware Not Present

How urgent? Book a check when convenient

What it means

The engine computer expects to get rough-road information (used to ignore bumps that look like misfires) but can't find the part or module that supplies it.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check if a computer or ABS module was recently replaced or reprogrammed
  2. Scan for communication codes from the ABS module

Signs you may notice

  • Check engine light on
  • Usually no driving symptoms
  • Possible false misfire codes on bumpy roads

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonEngine computer or ABS module programmed with the wrong configuration
  • PossibleRough road sensor or ABS module not communicating
  • PossibleWrong replacement module installed

Typical repair once the cause is confirmed

Usually reprogramming the engine or ABS module so their configuration matches the vehicle.

Common questions

What does P0317 mean?

The engine computer expects to get rough-road information (used to ignore bumps that look like misfires) but can't find the part or module that supplies it.

Can I drive with code P0317?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0317?

Common possibilities to test include: engine computer or abs module programmed with the wrong configuration; rough road sensor or abs module not communicating; wrong replacement module installed. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.