Home › Code lookup › P0324
Powertrain code · Engine

P0324 Knock Control System Error

How urgent? Book a check when convenient

What it means

The computer's system for listening for engine knock (pinging) isn't working right, so it may pull back spark timing to stay safe, which costs some power and mileage.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look for knock sensor circuit codes stored with it
  2. Check the knock sensor wiring and connector
  3. Use the fuel grade the owner's manual calls for

Signs you may notice

  • Check engine light on
  • Slightly less power or worse fuel economy
  • Possible pinging on hard acceleration

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty knock sensor
  • CommonDamaged or corroded knock sensor wiring
  • PossibleReal engine noise or knock from low-octane fuel or carbon buildup
  • PossibleEngine computer fault or needed software update

Typical repair once the cause is confirmed

Usually a knock sensor or wiring repair; sometimes a computer software update from the dealer.

Known on these vehicles

Walk through it step by step: Check engine light on →

Common questions

What does P0324 mean?

The computer's system for listening for engine knock (pinging) isn't working right, so it may pull back spark timing to stay safe, which costs some power and mileage.

Can I drive with code P0324?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0324?

Common possibilities to test include: faulty knock sensor; damaged or corroded knock sensor wiring; real engine noise or knock from low-octane fuel or carbon buildup; engine computer fault or needed software update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.