Home › Code lookup › P0363
Powertrain code · Ignition

P0363 Misfire Detected - Fueling Disabled

How urgent? Otherwise: Get it checked in the next few days

What it means

A cylinder was misfiring badly enough that the computer shut off its fuel injector to protect the catalytic converter. The engine keeps running on the other cylinders, so it will feel rough and weak.

Can I keep driving?

If the check engine light is flashing or the engine is shaking hard, pull over when it's safe and turn the engine off. Don't keep driving; a heavy misfire can overheat and ruin the catalytic converter and leave you without power in traffic. Have it towed or checked right away.

Otherwise: If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look for the cylinder-specific misfire code stored with it
  2. Check the plug, coil and injector on that cylinder

Signs you may notice

  • Check engine light on
  • Rough running and noticeably less power
  • Other misfire codes stored with it

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSevere misfire from a failed ignition coil or spark plug
  • PossibleStuck or failed fuel injector
  • PossibleLow compression in the affected cylinder

Typical repair once the cause is confirmed

Repair whatever is causing the misfire (often a coil or plug); the computer turns the injector back on afterward.

Walk through it step by step: Engine sputters or misfires →

Common questions

What does P0363 mean?

A cylinder was misfiring badly enough that the computer shut off its fuel injector to protect the catalytic converter. The engine keeps running on the other cylinders, so it will feel rough and weak.

Can I drive with code P0363?

If the check engine light is flashing or the engine is shaking hard, pull over when it's safe and turn the engine off. Don't keep driving; a heavy misfire can overheat and ruin the catalytic converter and leave you without power in traffic. Have it towed or checked right away. Otherwise: If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0363?

Common possibilities to test include: severe misfire from a failed ignition coil or spark plug; stuck or failed fuel injector; low compression in the affected cylinder. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.