P037E Glow Plug Sense Circuit Low
What it means
On a diesel, the voltage in the glow plug monitoring circuit is lower than expected. Glow plugs heat the cylinders so the engine starts easily in the cold.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect glow plug wiring and connectors for corrosion or damage
- Test each glow plug's resistance and the control module output
Signs you may notice
- Check engine light and often a glow plug warning light
- Hard starting when cold
- White smoke and rough running right after a cold start
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonDamaged or corroded glow plug wiring or connectors
- CommonFaulty glow plug control module
- PossibleFailed glow plug
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a wiring repair or a new glow plug control module; replace any failed glow plugs found during testing.
Common questions
What does P037E mean?
On a diesel, the voltage in the glow plug monitoring circuit is lower than expected. Glow plugs heat the cylinders so the engine starts easily in the cold.
Can I drive with code P037E?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P037E?
Common possibilities to test include: damaged or corroded glow plug wiring or connectors; faulty glow plug control module; failed glow plug; engine computer fault. A shop should confirm the cause before replacing parts.