Home › Code lookup › P037F
Powertrain code · Ignition

P037F Glow Plug Sense Circuit High

How urgent? Book a check when convenient

What it means

On a diesel, the voltage in the glow plug monitoring circuit is higher than expected. Glow plugs heat the cylinders so the engine starts easily in the cold.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect glow plug wiring and connectors for corrosion or damage
  2. Test each glow plug's resistance and the control module output

Signs you may notice

  • Check engine light and often a glow plug warning light
  • Hard starting when cold
  • White smoke and rough running right after a cold start

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonDamaged or corroded glow plug wiring or connectors
  • CommonFaulty glow plug control module
  • PossibleFailed glow plug
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Usually a wiring repair or a new glow plug control module; replace any failed glow plugs found during testing.

Walk through it step by step: Hard to start when cold →

Common questions

What does P037F mean?

On a diesel, the voltage in the glow plug monitoring circuit is higher than expected. Glow plugs heat the cylinders so the engine starts easily in the cold.

Can I drive with code P037F?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P037F?

Common possibilities to test include: damaged or corroded glow plug wiring or connectors; faulty glow plug control module; failed glow plug; engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.