P0380 Glow Plug/Heater Circuit "A"
What it means
On a diesel, the computer found a problem in glow plug (or intake heater) circuit A. Glow plugs heat the cylinders so the engine starts easily, so expect hard cold starts.
Can I keep driving?
It's usually fine to drive once the engine is warm and running well, but it may not start in cold weather and can run rough with white smoke after a cold start. Get it fixed soon, especially before winter. If smoke is heavy or it runs very rough, get it checked first.
What to test before replacing parts
Measure each glow plug's resistance, check the glow plug relay or control module, fuse and wiring, and confirm power reaches the plugs before replacing parts.
- Test each glow plug's resistance to find any that have burned out
- Inspect glow plug wiring, connectors and fuses
- Check that the control module or relay powers the plugs when commanded
Signs you may notice
- Check engine light and often a glow plug warning light
- Hard starting or long cranking in cold weather
- White smoke and rough running right after a cold start
- Engine may not start at all in very cold weather
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonOne or more failed glow plugs
- CommonFaulty glow plug control module or relay
- CommonDamaged, corroded or loose glow plug wiring
- PossibleBlown fuse or fusible link in the glow plug circuit
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Most often replacing failed glow plugs, the glow plug control module, or damaged wiring.
Where it shows up
- Seen on glow-plug diesels such as Ford Power Stroke pickups and VW TDI models
Common questions
What does P0380 mean?
On a diesel, the computer found a problem in glow plug (or intake heater) circuit A. Glow plugs heat the cylinders so the engine starts easily, so expect hard cold starts.
Can I drive with code P0380?
It's usually fine to drive once the engine is warm and running well, but it may not start in cold weather and can run rough with white smoke after a cold start. Get it fixed soon, especially before winter. If smoke is heavy or it runs very rough, get it checked first.
What causes P0380?
Common possibilities to test include: one or more failed glow plugs; faulty glow plug control module or relay; damaged, corroded or loose glow plug wiring; blown fuse or fusible link in the glow plug circuit. A shop should confirm the cause before replacing parts.