P0390 Camshaft Position Sensor "B" Circuit (Bank 2)
What it means
The engine computer says there's a fault in the circuit for camshaft position sensor B on bank 2. On most engines this sensor tracks the exhaust camshaft so the computer can time fuel, spark and valve timing.
Can I keep driving?
If it starts and runs smoothly, you can usually drive gently to a shop soon. If it stalls, runs rough or loses power, limit driving and avoid highways. If you hear rattling or the engine runs very rough, stop; a jumped timing belt or chain can cause serious engine damage.
What to test before replacing parts
Check the bank 2 "B" cam sensor signal and wiring and battery voltage while cranking, and verify cam-to-crank timing before replacing the sensor; a stretched or jumped timing chain or belt can set this code.
- Inspect the sensor connector for oil, corrosion or a broken lock tab
- Check battery and charging voltage
- Compare cam and crank signals with a scan tool or scope to check timing
Signs you may notice
- Check engine light on
- Long cranking or hard starting
- Stalling, rough running or reduced power
- Poor fuel economy
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed camshaft position sensor
- CommonDamaged wiring or loose, oil-soaked connector
- PossibleTiming belt or chain stretched or jumped a tooth
- PossibleWeak battery or charging voltage during cranking
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Usually a new camshaft position sensor or a wiring repair; if the timing is off, the timing chain or belt needs attention.
Common questions
What does P0390 mean?
The engine computer says there's a fault in the circuit for camshaft position sensor B on bank 2. On most engines this sensor tracks the exhaust camshaft so the computer can time fuel, spark and valve timing.
Can I drive with code P0390?
If it starts and runs smoothly, you can usually drive gently to a shop soon. If it stalls, runs rough or loses power, limit driving and avoid highways. If you hear rattling or the engine runs very rough, stop; a jumped timing belt or chain can cause serious engine damage.
What causes P0390?
Common possibilities to test include: failed camshaft position sensor; damaged wiring or loose, oil-soaked connector; timing belt or chain stretched or jumped a tooth; weak battery or charging voltage during cranking. A shop should confirm the cause before replacing parts.