P0520 Engine Oil Pressure Sensor/Switch Circuit
What it means
The computer sees a problem in the circuit for the oil pressure sensor, so it can't trust the oil pressure reading.
Can I keep driving?
Check the oil level as soon as you can safely stop. If the oil pressure light is on, the oil is low or you hear ticking or knocking, shut the engine off and don't drive; low oil pressure can wreck an engine in minutes. If the oil is full and the engine sounds normal, get it checked soon.
What to test before replacing parts
Check the oil level, then confirm real oil pressure with a mechanical gauge before replacing the sensor. Inspect the connector and wiring for oil soaking or damage.
- Check the oil level first
- Confirm real oil pressure with a mechanical gauge
- Inspect the sensor connector and wiring for oil, corrosion or damage
Signs you may notice
- Oil pressure gauge reads zero, maxed out or jumps around
- Oil pressure light on or flickering
- Check engine light on
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFaulty oil pressure sensor or switch
- CommonOil-soaked, loose or corroded connector, or damaged wiring
- PossibleLow oil level or real low oil pressure
- PossibleComputer fault (rare)
Typical repair once the cause is confirmed
Usually a new oil pressure sensor or a connector repair, once real oil pressure is confirmed good.
Known on these vehicles
Common questions
What does P0520 mean?
The computer sees a problem in the circuit for the oil pressure sensor, so it can't trust the oil pressure reading.
Can I drive with code P0520?
Check the oil level as soon as you can safely stop. If the oil pressure light is on, the oil is low or you hear ticking or knocking, shut the engine off and don't drive; low oil pressure can wreck an engine in minutes. If the oil is full and the engine sounds normal, get it checked soon.
What causes P0520?
Common possibilities to test include: faulty oil pressure sensor or switch; oil-soaked, loose or corroded connector, or damaged wiring; low oil level or real low oil pressure; computer fault (rare). A shop should confirm the cause before replacing parts.