P0538 A/C Evaporator Temperature Sensor Circuit High
What it means
The signal from the A/C evaporator temperature sensor is higher than it should ever be, which usually points to a broken wire, bad ground or a failed sensor. This part tells the computer how cold the A/C evaporator is so it does not freeze up.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the wiring and connector for broken wires or corrosion
- Check reference voltage and ground at the connector with a meter
Signs you may notice
- A/C blowing warm or cutting out
- A/C may ice up and lose airflow
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonBroken wire or poor ground in the sensor circuit
- CommonFaulty A/C evaporator temperature sensor
- PossibleUnplugged or corroded connector
- PossibleSignal wire shorted to a voltage source
Typical repair once the cause is confirmed
Usually a wiring or connector repair, or a new A/C evaporator temperature sensor if it tests bad.
Common questions
What does P0538 mean?
The signal from the A/C evaporator temperature sensor is higher than it should ever be, which usually points to a broken wire, bad ground or a failed sensor. This part tells the computer how cold the A/C evaporator is so it does not freeze up.
Can I drive with code P0538?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0538?
Common possibilities to test include: broken wire or poor ground in the sensor circuit; faulty a/c evaporator temperature sensor; unplugged or corroded connector; signal wire shorted to a voltage source. A shop should confirm the cause before replacing parts.