Home › Code lookup › P2506
Powertrain code · Computer

P2506 ECM/PCM Power Input Signal Range/Performance

How urgent? Get it checked in the next few days

What it means

The computer is watching the power supply circuit to the engine computer and is getting a signal that does not make sense for current conditions. The engine computer needs a steady supply voltage to run everything else correctly.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for other codes that point to the underlying problem
  2. Compare the power supply circuit to the engine computer reading with expected values in live data
  3. Inspect the wiring and connector

Signs you may notice

  • Check engine light on
  • Hard starting or stalling in some cases
  • Other electrical codes may appear

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWeak battery or loose, corroded battery terminals
  • CommonFailing or sticking engine computer power relay
  • CommonA real problem in the system the part works with
  • PossibleWiring or connector with high resistance
  • PossibleComputer software that needs an update

Typical repair once the cause is confirmed

Fix the battery, cable or wiring fault first; replace the power relay or fuse if bad. The engine computer itself is rarely the cause.

Walk through it step by step: Check engine light on →

Common questions

What does P2506 mean?

The computer is watching the power supply circuit to the engine computer and is getting a signal that does not make sense for current conditions. The engine computer needs a steady supply voltage to run everything else correctly.

Can I drive with code P2506?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2506?

Common possibilities to test include: weak battery or loose, corroded battery terminals; failing or sticking engine computer power relay; a real problem in the system the part works with; wiring or connector with high resistance. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.