P2707 Shift Solenoid "F" Performance/Stuck Off
What it means
The shift solenoid "F" is not responding the way the computer expects. This solenoid inside the automatic transmission directs fluid to change gears.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the transmission fluid level and condition
- Look for other transmission codes
- Have the solenoid tested and commanded with a scan tool
Signs you may notice
- Check engine or transmission warning light on
- Harsh, late or erratic shifts
- Transmission may go into limp mode (stuck in one gear)
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonSticking shift solenoid "F"
- CommonLow, dirty or wrong transmission fluid
- PossibleWorn valve body or internal fluid leak
- PossibleWorn clutches inside the transmission
Typical repair once the cause is confirmed
Service the fluid if it is low or dirty; if the code returns, replace the shift solenoid or valve body.
Common questions
What does P2707 mean?
The shift solenoid "F" is not responding the way the computer expects. This solenoid inside the automatic transmission directs fluid to change gears.
Can I drive with code P2707?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2707?
Common possibilities to test include: sticking shift solenoid "f"; low, dirty or wrong transmission fluid; worn valve body or internal fluid leak; worn clutches inside the transmission. A shop should confirm the cause before replacing parts.