P2700 Transmission Friction Element "A" Apply Time Range/Performance
What it means
One of the clutches or bands inside the automatic transmission (element A) is taking longer or shorter than expected to apply during a shift.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the transmission fluid level and condition
- Look for related solenoid or pressure codes
- Have a shop check line pressure and shift data
Signs you may notice
- Check engine or transmission light on
- Slipping, flare or harsh shifts
- Delayed engagement into gear
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLow, dirty or wrong transmission fluid
- CommonWorn clutch pack or band
- CommonSticking pressure control solenoid or valve body
- PossibleInternal fluid leak from worn seals
- PossibleTransmission adaptive values need to be reset or relearned
Typical repair once the cause is confirmed
Start with the fluid and any solenoid faults; worn clutches may need a transmission repair or rebuild.
Known on these vehicles
Common questions
What does P2700 mean?
One of the clutches or bands inside the automatic transmission (element A) is taking longer or shorter than expected to apply during a shift.
Can I drive with code P2700?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2700?
Common possibilities to test include: low, dirty or wrong transmission fluid; worn clutch pack or band; sticking pressure control solenoid or valve body; internal fluid leak from worn seals. A shop should confirm the cause before replacing parts.