Home › Code lookup › P2740
Powertrain code · Transmission

P2740 Transmission Fluid Temperature Sensor "B" Circuit

How urgent? Book a check when convenient

What it means

The computer is watching the transmission fluid temperature sensor "B" circuit and has spotted an electrical fault. The transmission computer uses fluid temperature to adjust shift feel and torque converter lock-up.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look over the connector and wiring for the transmission fluid temperature sensor "B" circuit, checking for damage, corrosion or a loose fit
  2. Check power, ground and signal with a meter
  3. Clear the code and see if it comes back

Signs you may notice

  • Check engine light on
  • Shifts may feel firm or delayed
  • Torque converter may not lock up

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonUnplugged, loose or corroded connector at the transmission fluid temperature sensor "B"
  • CommonBroken or chafed wire in the transmission fluid temperature sensor "B" circuit
  • CommonFailed transmission fluid temperature sensor "B"
  • PossibleMissing reference voltage or ground from the computer
  • PossibleControl module fault (rare)

Typical repair once the cause is confirmed

Repair the wiring or connector if it is damaged; otherwise replace the transmission fluid temperature sensor "B".

Walk through it step by step: Transmission warning light on →

Common questions

What does P2740 mean?

The computer is watching the transmission fluid temperature sensor "B" circuit and has spotted an electrical fault. The transmission computer uses fluid temperature to adjust shift feel and torque converter lock-up.

Can I drive with code P2740?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2740?

Common possibilities to test include: unplugged, loose or corroded connector at the transmission fluid temperature sensor "b"; broken or chafed wire in the transmission fluid temperature sensor "b" circuit; failed transmission fluid temperature sensor "b"; missing reference voltage or ground from the computer. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.