P2741 Transmission Fluid Temperature Sensor "B" Circuit Range/Performance
What it means
The computer is watching the transmission fluid temperature sensor "B" circuit and is getting a signal that does not make sense for current conditions. The transmission computer uses fluid temperature to adjust shift feel and torque converter lock-up.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for other codes that point to the underlying problem
- Compare the transmission fluid temperature sensor "B" circuit reading with expected values in live data
- Inspect the wiring and connector
Signs you may notice
- Check engine light on
- Shifts may feel firm or delayed
- Torque converter may not lock up
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or sticking transmission fluid temperature sensor "B"
- CommonTransmission actually running hot or low on fluid
- PossibleWiring or connector with high resistance
- PossibleComputer software that needs an update
Typical repair once the cause is confirmed
Find out whether the transmission fluid temperature sensor "B" itself or the system it works with is at fault, then repair or replace as needed.
Common questions
What does P2741 mean?
The computer is watching the transmission fluid temperature sensor "B" circuit and is getting a signal that does not make sense for current conditions. The transmission computer uses fluid temperature to adjust shift feel and torque converter lock-up.
Can I drive with code P2741?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2741?
Common possibilities to test include: failing or sticking transmission fluid temperature sensor "b"; transmission actually running hot or low on fluid; wiring or connector with high resistance; computer software that needs an update. A shop should confirm the cause before replacing parts.