Home › Code lookup › P2742
Powertrain code · Transmission

P2742 Transmission Fluid Temperature Sensor "B" Circuit Low

How urgent? Book a check when convenient

What it means

The computer is watching the transmission fluid temperature sensor "B" circuit and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. The transmission computer uses fluid temperature to adjust shift feel and torque converter lock-up.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the wiring in the transmission fluid temperature sensor "B" circuit for rubbed-through insulation touching metal
  2. Unplug the transmission fluid temperature sensor "B" and see if the reading changes
  3. Clear the code and see if it returns right away

Signs you may notice

  • Check engine light on
  • Shifts may feel firm or delayed
  • Torque converter may not lock up

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSignal wire in the transmission fluid temperature sensor "B" circuit shorted to ground or open
  • CommonFailed transmission fluid temperature sensor "B"
  • PossibleCorroded or loose connector
  • PossibleControl module fault (rare)

Typical repair once the cause is confirmed

Fix any shorted wiring first; if the wiring tests good, replace the transmission fluid temperature sensor "B".

Walk through it step by step: Transmission warning light on →

Common questions

What does P2742 mean?

The computer is watching the transmission fluid temperature sensor "B" circuit and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. The transmission computer uses fluid temperature to adjust shift feel and torque converter lock-up.

Can I drive with code P2742?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2742?

Common possibilities to test include: signal wire in the transmission fluid temperature sensor "b" circuit shorted to ground or open; failed transmission fluid temperature sensor "b"; corroded or loose connector; control module fault (rare). A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.