Home › Code lookup › P2753
Powertrain code · Transmission

P2753 Transmission Fluid Cooler Control Circuit/Open

How urgent? Get it checked in the next few days

What it means

The computer is watching the transmission fluid cooler control circuit and sees what looks like a broken or disconnected circuit. Some vehicles control transmission fluid cooling with an electric valve or fan.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look over the connector and wiring for the transmission fluid cooler control circuit, checking for damage, corrosion or a loose fit
  2. Check power, ground and resistance of the part with a meter
  3. Clear the code and see if it comes back

Signs you may notice

  • Check engine light on
  • Transmission may run hot when towing or in traffic
  • Possible overheating warning

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonUnplugged, loose or corroded connector at the transmission fluid cooler control valve or relay
  • CommonBroken or chafed wire in the transmission fluid cooler control circuit
  • CommonFailed transmission fluid cooler control valve or relay
  • PossibleBlown fuse or failed relay feeding the circuit
  • PossibleControl module fault (rare)

Typical repair once the cause is confirmed

Repair the wiring or connector if it is damaged; otherwise replace the transmission fluid cooler control valve or relay.

Walk through it step by step: Transmission warning light on →

Common questions

What does P2753 mean?

The computer is watching the transmission fluid cooler control circuit and sees what looks like a broken or disconnected circuit. Some vehicles control transmission fluid cooling with an electric valve or fan.

Can I drive with code P2753?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2753?

Common possibilities to test include: unplugged, loose or corroded connector at the transmission fluid cooler control valve or relay; broken or chafed wire in the transmission fluid cooler control circuit; failed transmission fluid cooler control valve or relay; blown fuse or failed relay feeding the circuit. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.