P2754 Transmission Fluid Cooler Control Circuit Low
What it means
The computer is watching the transmission fluid cooler control circuit and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. Some vehicles control transmission fluid cooling with an electric valve or fan.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the wiring in the transmission fluid cooler control circuit for rubbed-through insulation touching metal
- Check the wiring for a short to ground with a meter
- Clear the code and see if it returns right away
Signs you may notice
- Check engine light on
- Transmission may run hot when towing or in traffic
- Possible overheating warning
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonControl wire to the transmission fluid cooler control valve or relay shorted to ground
- CommonFailed transmission fluid cooler control valve or relay
- PossibleCorroded or loose connector
- PossibleControl module fault (rare)
Typical repair once the cause is confirmed
Fix any shorted wiring first; if the wiring tests good, replace the transmission fluid cooler control valve or relay.
Common questions
What does P2754 mean?
The computer is watching the transmission fluid cooler control circuit and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. Some vehicles control transmission fluid cooling with an electric valve or fan.
Can I drive with code P2754?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2754?
Common possibilities to test include: control wire to the transmission fluid cooler control valve or relay shorted to ground; failed transmission fluid cooler control valve or relay; corroded or loose connector; control module fault (rare). A shop should confirm the cause before replacing parts.