P2766 Input/Turbine Speed Sensor "B" Circuit Range/Performance
What it means
The computer is watching the input/turbine speed sensor "B" circuit and is getting a signal that does not make sense for current conditions. This sensor measures how fast the transmission input is turning so the computer can control shifts and lock-up.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for other codes that point to the underlying problem
- Compare the input/turbine speed sensor "B" circuit reading with expected values in live data
- Inspect the wiring and connector
Signs you may notice
- Check engine or transmission light on
- Harsh or erratic shifts
- Transmission may stay in one gear (limp mode)
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailing or sticking input/turbine speed sensor "B"
- CommonSlipping clutches or torque converter problem
- PossibleWiring or connector with high resistance
- PossibleComputer software that needs an update
Typical repair once the cause is confirmed
Find out whether the input/turbine speed sensor "B" itself or the system it works with is at fault, then repair or replace as needed.
Common questions
What does P2766 mean?
The computer is watching the input/turbine speed sensor "B" circuit and is getting a signal that does not make sense for current conditions. This sensor measures how fast the transmission input is turning so the computer can control shifts and lock-up.
Can I drive with code P2766?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2766?
Common possibilities to test include: failing or sticking input/turbine speed sensor "b"; slipping clutches or torque converter problem; wiring or connector with high resistance; computer software that needs an update. A shop should confirm the cause before replacing parts.