Home › Code lookup › P2775
Powertrain code · Transmission

P2775 Upshift Switch Circuit Range/Performance

How urgent? Book a check when convenient

What it means

The computer is watching the upshift switch circuit and is getting a signal that does not make sense for current conditions. This switch lets you shift up manually with a paddle or the shift lever.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for other codes that point to the underlying problem
  2. Compare the upshift switch circuit reading with expected values in live data
  3. Inspect the wiring and connector

Signs you may notice

  • Check engine light on
  • Manual shift buttons or paddles may not work

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn or sticking switch, sometimes from spilled drinks in the shifter
  • CommonFailing or sticking upshift switch (paddle or shifter button)
  • CommonA real problem in the system the part works with
  • PossibleWiring or connector with high resistance
  • PossibleComputer software that needs an update

Typical repair once the cause is confirmed

Find out whether the upshift switch (paddle or shifter button) itself or the system it works with is at fault, then repair or replace as needed.

Walk through it step by step: Transmission warning light on →

Common questions

What does P2775 mean?

The computer is watching the upshift switch circuit and is getting a signal that does not make sense for current conditions. This switch lets you shift up manually with a paddle or the shift lever.

Can I drive with code P2775?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P2775?

Common possibilities to test include: worn or sticking switch, sometimes from spilled drinks in the shifter; failing or sticking upshift switch (paddle or shifter button); a real problem in the system the part works with; wiring or connector with high resistance. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.