P2778 Upshift Switch Circuit Intermittent/Erratic
What it means
The computer is watching the upshift switch circuit and is seeing a signal that cuts in and out. This switch lets you shift up manually with a paddle or the shift lever.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Wiggle the wiring for the upshift switch circuit with the engine running while watching live data
- Check connector pins for corrosion or spread terminals
- Note when it happens (hot, cold, bumps) to narrow it down
Signs you may notice
- Check engine light on
- Manual shift buttons or paddles may not work
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWorn or sticking switch, sometimes from spilled drinks in the shifter
- CommonLoose connector or chafed wire that loses contact over bumps
- CommonUpshift switch (paddle or shifter button) failing on and off
- PossibleCorrosion inside the connector
- PossiblePoor ground connection
Typical repair once the cause is confirmed
Repair the loose or corroded connection; replace the upshift switch (paddle or shifter button) if the wiring is solid.
Common questions
What does P2778 mean?
The computer is watching the upshift switch circuit and is seeing a signal that cuts in and out. This switch lets you shift up manually with a paddle or the shift lever.
Can I drive with code P2778?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P2778?
Common possibilities to test include: worn or sticking switch, sometimes from spilled drinks in the shifter; loose connector or chafed wire that loses contact over bumps; upshift switch (paddle or shifter button) failing on and off; corrosion inside the connector. A shop should confirm the cause before replacing parts.